Valid

GB/T 35241-2017Test methods for volatile content of ultraviolet curable coatings for wood products (English PDF)

木质制品用紫外光固化涂料挥发物含量的检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35241-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35241-2017 is the English-translated version of 木质制品用紫外光固化涂料挥发物含量的检测方法.

GB/T 35241-2017 is the Chinese standard "Test methods for volatile content of ultraviolet curable coatings for wood products". Its scope clause reads: This standard specifies the wood products with UV (UV) curing coatings (hereinafter referred to as UV coatings) Determination of volatile content.

This standard applies to wood-based panels, wooden doors, wood flooring and other wood products coated with non-aqueous UV coating. Its clauses include terms and definitions; test methods.

Found what you need?

Document preview — GB/T 35241-2017

National Standard of the People's Republic of China

ICS
79.060.99
Classification
B 70

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Terms and definitions
  • 2.1 UV curable coatings
  • 2.2 Volatile content during finishing
  • 2.3 Potential volatile content
  • 2.4 Total volatile content
  • 3 test methods

1 Scope

This standard specifies the wood products with UV (UV) curing coatings (hereinafter referred to as UV coatings) Determination of volatile content.

This standard applies to wood-based panels, wooden doors, wood flooring and other wood products coated with non-aqueous UV coating.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 UV curable coatings

In UV light irradiation, UV liquid paint in the photoinitiator excited by the change into free radicals or cations, which led to the paint with

Reactive substances occur between the chemical reaction, eventually leading to the formation of three-dimensional structure, so that paint curing.

2.2 Volatile content during finishing

Simulation of the actual industrial curing conditions, the UV coating by UV light radiation curing, the quality of the sample curing process loss.

2.3 Potential volatile content

The cured UV coating samples were placed in a (110 ± 2) °C oven heated 1h, the sample was measured for mass loss.

2.4 Total volatile content

The sum of the volatile content and the potential volatile content of the finishing process.

3 test methods

3.1

Volatile total content of less than or equal to 3% of the test method

3.1.1 principle

Weigh the quantitative UV coating samples, simulated industrial processing methods will be applied to the aluminum substrate, and then weighed aluminum substrate quality, with purple

External light irradiation test sample curing, weighing UV coating process of coating the volatile content; the cured sample after cooling

Heat in a (110 ± 2) ° C oven for 60 min and calculate the potential volatiles content by mass loss, the sum of the two being the UV coating volatiles

Total content.

3.1.2 instruments and equipment

The required equipment and equipment are as follows.

a) Aluminum (305mm × 102mm) or without plastic foil (thickness not less than 0.05mm).

Note. For ease of operation and weighing, cut an aluminum plate of the same size as three aluminum plates as a test plate (the size of the test plate should be guaranteed to be a minimum of 0.2 g

UV coating, to meet the coating thickness provided by the supplier requirements), before use, the cut test sample into the (110 ± 2) °C dryer […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35241-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35241-2017

$90.00