GB/T 35207-2017Electric excitation direct drive wind turbines (English PDF)
电励磁直驱风力发电机组
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35207-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35207-2017 is the English-translated version of 电励磁直驱风力发电机组.
GB/T 35207-2017 is the Chinese standard "Electric excitation direct drive wind turbines".
Its scope clause reads: This standard specifies the electric excitation direct drive wind turbine environmental conditions, technical requirements, production and assembly requirements, the unit nameplate, inspection rules Test Methods, Packaging, Transport, Storage, Stochastic Documentation and Delivery.
This standard applies to the wind turbine sweep area greater than.200m2 horizontal axis excitation magnetic direct drive wind turbine (hereinafter referred to as "unit").
The electric excitation part of the hybrid excitation wind power generator set including the electric excitation technology can be implemented with reference to this standard.
Found what you need?
Document preview — GB/T 35207-2017
National Standard of the People's Republic of China
- ICS
- 27.180
- Classification
- F 11
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 environmental conditions
- 5 technical requirements
- 6 production and assembly requirements
- 7 unit nameplate
- 9 Test Methods
- 10 Packaging, transport, storage, random documentation and delivery
- Appendix A (informative) test report format and content
1 Scope
This standard specifies the electric excitation direct drive wind turbine environmental conditions, technical requirements, production and assembly requirements, the unit nameplate, inspection rules
Test Methods, Packaging, Transport, Storage, Stochastic Documentation and Delivery.
This standard applies to the wind turbine sweep area greater than.200m2 horizontal axis excitation magnetic direct drive wind turbine (hereinafter referred to as "unit").
The electric excitation part of the hybrid excitation wind power generator set including the electric excitation technology can be implemented with reference to this standard.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all revisions) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 997 rotary motor structure type, installation type and junction box location classification (IM code)
GB/T 1993 rotary motor cooling method
GB/T 2900.18 Electrotechnical terminology low-voltage electrical appliances
GB/T 2900.53 Electrotechnical terminology wind turbine
GB/T 4942.1 rotary motor overall structure of the protection level (IP code) classification
GB/T 6388 transport packaging shipping symbols
GB/T 7409.1 synchronous motor excitation system definition
GB/T 10068 Shaft center height of 56mm and above the motor vibration and vibration measurement, assessment and limits
GB/T 10069.1 rotary motor noise measurement methods and limits - Part 1. Rotor electrical noise measurement method
GB/T 10069.3 rotary motor noise measurement methods and limits - Part 3 noise limits
GB/T 10233 low-voltage switchgear and electronic control equipment - Basic test methods
GB/T 12325 power quality power supply voltage deviation
GB/T 12326 power quality voltage fluctuations and flicker
GB/T 12665 motor under normal conditions of use damp heat test requirements
GB/T 12668.3 speed control electrical transmission system Part 3. Electromagnetic compatibility requirements and specific test methods
GB/T 14039 hydraulic transmission fluid solid particles pollution level code
GB/T 14549 Power Quality Utility Harmonic
GB/T 15543 power quality three-phase voltage imbalance
GB/T 15945 Power quality Power system frequency deviation
GB/T 16895.3 Electrical installations of buildings Part 5-54. Selection and installation of electrical equipment Grounding configuration, protective conductor and
Protect the connecting conductor
GB/T 17626.2 Electromagnetic compatibility test and measurement techniques Electrostatic discharge immunity test
GB/T 17626.3 Electromagnetic compatibility testing and measurement techniques RF electromagnetic field immunity test
GB/T 17626.4 Electromagnetic compatibility test and measurement techniques fast transient burst immunity test
GB/T 17626.5 electromagnetic compatibility test and measurement techniques surge (impact) immunity test
GB/T 17626.6 electromagnetic compatibility test and measurement techniques RF field induced conducted disturbances Immunity […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35207-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 35207-2017
$295.00