Valid

GB/T 35197-2017Earth-moving machinery—Non-road electrical drive mining dumpers—Test methods (English PDF)

土方机械非公路电传动矿用自卸车试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (30 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35197-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35197-2017 is the English-translated version of 土方机械非公路电传动矿用自卸车试验方法.

GB/T 35197-2017 is the Chinese standard "Earth-moving machinery—Non-road electrical drive mining dumpers—Test methods". Its scope clause reads: This standard specifies the test method of non-road rear dump rigid electric drive mining dump truck.

This standard applies to non-road rear unloading rigid electric drive mining dump truck (hereinafter referred to as "dump truck"). Dump truck based on the modified products (electric drive mining sprinkler, wrecker, etc.) can refer to the use of this standard. Its clauses include test conditions.

Found what you need?

Document preview — GB/T 35197-2017

National Standard of the People's Republic of China

ICS: 53.100
Classification: P 97

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 test conditions
4 before the test preparation
5 Determination of the main structural parameters
6 dynamic performance test
7 electric braking performance test
8 Braking performance test
10 constant speed fuel consumption test
11 steering wheel steering and steering stability test
12 Steering ability test
13 minimum turning diameter determination
14 hydraulic dumping mechanism test
15 Starting performance test
16 Cabin heating, ventilation and air conditioning performance test
17 Cabin windshield defrosting system test
18 Noise measurement
19 Determination of diesel engine exhaust pollutant emission limits
20 Fall Protection Structure (FOPS) and Roll Over Protection Structure (ROPS) Test
Appendix A (informative) test record table

1 Scope

This standard specifies the test method of non-road rear dump rigid electric drive mining dump truck.

This standard applies to non-road rear unloading rigid electric drive mining dump truck (hereinafter referred to as "dump truck").

Dump truck based on the modified products (electric drive mining sprinkler, wrecker, etc.) can refer to the use of this standard.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

Earth - moving machinery GB/T 8592 Determination of steering size of the machine

GB/T 14781 earthmoving machinery tire machine steering requirements

Earthwork machinery driver field test methods and performance criteria

GB/T 17771 earth machinery fall protection structure laboratory test and performance requirements

GB/T 17922 Earth-moving machinery rolling protection structure laboratory tests and performance requirements

GB/T 19933.4 Earth-moving machinery cab environment Part 4 - Test methods for heating, ventilation and air conditioning (HVAC) and performance

GB/T 19933.5 Earth-moving machinery cab environment - Part 5. Test method of the windshield defrosting system

GB 20891 Non-road mobile machinery exhaust emission limits and measurement methods of diesel engines (China's third and fourth phase)

GB/T 21152 earthmoving machinery - Performance requirements and test methods for tire machine brake systems

GB/T 21153 earthmoving machinery dimensions, performance and parameters of the unit and measurement accuracy

Earth-moving machinery GB/T 25602 machine usability terms

GB/T 25614 Earth-moving machinery sound power level dynamic test conditions

Earth-moving machinery - Determination of the sound pressure level at the driver's location - Dynamic test conditions

Earth - moving machinery Dumper compartment capacity calibration

Earthmoving machinery - Off - road mine electric dump truck technical specifications

GB J22 Mine Road Design Code

QC/T 76.11 mining dump truck test method using the reliability test

3 test conditions

3.1

dump truck all parts, the assembly should be formal drawings and technical documentation shall be fully equipped, clean, and installed in the specified location,

Adjustment status should be consistent with the provisions of GB/T 35196.

3.2

Dump Truck components and assembly of the machine, electricity, gas, liquid systems are subject to inspection, adjustment and testing, and a formal test or test report.

3.3

dump truck main parts of the important features of the precision measurement can be carried out before assembly, measurement items and methods with reference to the appropriate standards by the manufacturer

Develop official test or test record. The operating parts should be sensitive, reliable, the positioning of the pedal and operating rod obvious, accurate action, all the moving parts should be shipped […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.

Referenced standards

Cited by

GB/T 45054-2024Earth-moving machinery - Battery electric non-road mining dumpers - Test methods

Similar standards

GB 48002-2026|GB/T 47724-2026|GB 16710-2025|GB/T 25028-2025|GB/T 45375-2025|GB/T 45866-2025

How to Download GB/T 35197-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.