GB/T 35192-2017Earth-moving machinery - Non-road mechanical drive wide-body dumpers - Test methods (English PDF)
土方机械 非公路机械传动宽体自卸车 试验方法
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35192-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35192-2017 is the English-translated version of 土方机械 非公路机械传动宽体自卸车 试验方法.
GB/T 35192-2017 is the Chinese standard "Earth-moving machinery - Non-road mechanical drive wide-body dumpers - Test methods".
Its scope clause reads: This standard specifies the non-road mechanical transmission wide-body dump truck performance test, fuel consumption test, liquefied natural gas (LNG) wide body Dump Truck special device test and reliability test method.
This standard applies to the internal combustion engine as the power after the dump truck off-road mechanical wide-body dump truck. Wide-body dump on non-road machinery drives Vehicles (hereinafter referred to as dump truck) based on modified products can refer to use. Its clauses include before the test preparation.
Found what you need?
Document preview — GB/T 35192-2017
National Standard of the People's Republic of China
- ICS
- 53.100
- Classification
- P 97
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 pre-test preparation
- 4 Performance Test
- 5 fuel consumption test
- 6 Liquefied natural gas (LNG) wide-body dump truck (hereinafter referred to as LNG gas dump truck) dedicated device test
- 7 reliability test
- Appendix A (informative) test record table
- Appendix B (informative) reliability test record table
1 Scope
This standard specifies the non-road mechanical transmission wide-body dump truck performance test, fuel consumption test, liquefied natural gas (LNG) wide body
Dump Truck special device test and reliability test method.
This standard applies to the internal combustion engine as the power after the dump truck off-road mechanical wide-body dump truck. Wide-body dump on non-road machinery drives
Vehicles (hereinafter referred to as dump truck) based on modified products can refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1184 shape and location tolerances are not tolerance values
GB/T 8499 earth moving machinery to determine the location of the center of gravity method
Earth - moving machinery GB/T 8592 Determination of steering size of the machine
GB/T 14781 earthmoving machinery tire machine steering requirements
Earthwork machinery driver field test methods and performance criteria
GB 17691 compression limit, gas-fired ignition engines and automotive exhaust pollutant emission limits and measurement methods (China III,
IV, V stage)
GB 20891 Non-road mobile machinery exhaust emission limits and measurement methods of diesel engines (China's third and fourth phase)
GB/T 21152 earthmoving machinery - Performance requirements and test methods for tire machine brake systems
GB/T 21153 earthmoving machinery dimensions, performance and parameters of the unit and measurement accuracy
GB/T 21154 earth moving machinery machine and its work equipment and components of the quality measurement methods
Earth - moving machinery - Terms of machine usability
GB/T 25614 Earth-moving machinery sound power level dynamic test conditions
Earth-moving machinery - Determination of the sound pressure level at the driver's location - Dynamic test conditions
Earth - moving machinery safety - Part 6. Dump truck requirements
GB/T 25685.1 Earth-moving machinery and mirrors and mirrors vision - Part 1. Test methods
Earth - moving machinery Dumper compartment capacity calibration
GB J22 Mine Road Design Code
ISO 11500 optics shading method for automatic transmission Particle contaminant level determination for liquid samples (Hydraulic fluidpower-Determinationoftheparticulatecontaminationlevelofaliquidsamplebyautomaticpar- ticlecounting usingthelight-extinctionprinciple)
3 before the test preparation
3.1 instrument accuracy requirements
Test equipment before the test should be checked and calibrated, measuring accuracy should be consistent with the provisions of GB/T 21153.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 35192-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 35192-2017
$420.00