GB/T 35158-2017Verification method for Auger electron spectrometers(AES) (English PDF)
俄歇电子能谱仪检定方法
This is a limited preview
Buy now to download the full PDF (45 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35158-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
November 1, 2018
Scope
GB/T 35158-2017 is the English-translated version of 俄歇电子能谱仪检定方法.
GB/T 35158-2017 is the Chinese standard "Verification method for Auger electron spectrometers(AES)". Its scope clause reads: This standard specifies the verification method for Auger electron spectrometers.
This standard applies to an Auger electron spectrometer with an excitation source of an electron beam and an ion gun for sputtering cleaning. Its clauses include abbreviations and symbols.
Found what you need?
Document preview — GB/T 35158-2017
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Classification
- G 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Abbreviations and symbols
- 3.1 Abbreviations
- 3.2 Symbol
- 4 Methodology and System Structure
- 4.1 Method principle
- 4.2 System Configuration
- 5 Units of measure and technical indicators
- 5.1 Unit of measure
- 5.2 Technical Specifications
- 6 Verification Environment
- 6.1 Appearance Requirements
- 6.2 Installation Site Requirements
- 6.3 Power Supply
- 6.4 Ambient Temperature and Humidity
- 7 Verification Projects and Methods
- 7.1 Energy Standard Verification
- 7.2 Strength Index Verification
- 7.3 Transverse Resolution Verification
- 7.4 Ion Gun Verification
- 7.5 Charge Control and Calibration Verification
- 8 Report verification result
- 9 Certification cycle
1 Scope
This standard specifies the verification method for Auger electron spectrometers.
This standard applies to an Auger electron spectrometer with an excitation source of an electron beam and an ion gun for sputtering cleaning.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 20175-2006 Surface Chemical Analysis Sputter Depth Analysis Using Lamellar Membrane System as Reference Material Optimization Method
GB/T 21006-2007 Surface chemical analysis X-ray photoelectron spectrometer and Auger electron spectrometer intensity standard linearity
GB/T 28632-2012 Surface chemical analysis Auger electron spectroscopy and X-ray photoelectron spectroscopy Determination of transverse resolution
GB/T 29558-2013 Surface chemical analysis Repeatability and consistency of Auger electron spectrometer intensity scales
GB/T 29731-2013 Surface chemical analysis Energy standard calibration for elemental and chemical analysis of high resolution Auger electron spectrometers
GB/T 29732-2013 Surface chemical analysis Energy standard calibration for elemental analysis of medium resolution Auger electron spectrometer
GB/T 32998-2016 Surface chemical analysis Regulatory requirements for reporting of charge control and calibration methods for Auger electron energy spectrum
ISO 16531.2013 Surface chemical analysis depth profile ion beam alignment method for AES and XPS depth profiling and corresponding
Current or current density measurement (Surfacechemicalanalysis-Depthprofiling-Methodsforionbeamalignment andtheassociatedmeasurementofcurrentorcurrentdensityfordepthprofilinginAESandXPS)
ISO 17109.2015 Surface chemical analysis Depth analysis Using sputter-depth profiling for the determination of X-ray photoelectron energy
Spectroscopy, Auger Electron Spectroscopy, and Secondary Ion Mass Spectrometry Sputtering Rate (Surface chemical analysis-Depth profiling-Method for sputterratedeterminationinX-rayphotoelectronspectroscopy,Augerelectronspectroscopyandsecondary-ion
Massspectrometrysputterdepthprofilingusingsingleandmulti-layerthinfilms)
3 Abbreviations and symbols
3.1 Abbreviations
The following abbreviations apply to this document.
XPS. X-ray Photoelectron Spectroscopy
AES. Auger Electron Spectroscopy
OMI. Optical Microscope Image
SEI. Secondary Electron Image
SEM. Secondary Electron Microscope
FWHM. Full width at half maximum intensity above background, in eV (fulwidthathalfmaximumpeakinten-
Sityabovethebackground,ineV)
3.2 Symbols
The following symbols apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 45 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35158-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35158-2017
$710.00