Valid

GB/T 35108-2017Determination methods of petroleum oils in petroleum oil pesticides (English PDF)

矿物油农药中矿物油的测定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35108-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35108-2017 is the English-translated version of 矿物油农药中矿物油的测定方法.

GB/T 35108-2017 lays down the determination methods for mineral oil in mineral oil pesticides.

Clause 1 states that it specifies methods for determining the mass fraction of mineral oil, the relative carbon number range of normal paraffins, the relative average carbon number and the non-sulfonated content, and that it applies to the determination of those quantities in refined mineral oil used for mineral oil pesticides and in products made from it, with the non-sulfonated content determination applicable only to refined mineral oil.

Clause 2 defines mineral oil as a mixture generally made up of three classes of compounds, isoparaffins, naphthenes and aromatic hydrocarbons.

Clause 3 holds the test methods, and the part shown covers the determination of the mineral oil mass fraction by gas chromatography with a flame ionisation detector and quantification by the internal standard method, the sample being dissolved in chloroform with di-n-octyl phthalate as the internal standard and separated on a bonded OV-1701 quartz capillary column of 30 m by 0.32 mm internal diameter with a film thickness of 0.25 micrometre.

The same clause sets the requirements for the mineral oil standard, which is to be refined mineral oil of known mass fraction of not less than 99.0% whose label also states a relative normal paraffin carbon number range of not more than 8, a relative average normal paraffin carbon number between 21 and 24 and a non-sulfonated content of not less than 92%, both carbon number figures being expressed to one decimal place, and it notes that these characteristics of the standard are to match those of the test substance.

It also prescribes the gas chromatographic operating conditions, with the column oven starting at 80 degrees Celsius for 2 minutes, heating at 15 degrees Celsius per minute and holding the final temperature of 270 degrees Celsius for 12 minutes, and lists the apparatus required, including a chromatography data processor or workstation and a 10-microlitre microsyringe.

The standard was proposed by the China Petroleum and Chemical Industry Federation and is administered by the National Technical Committee for Standardization of Pesticides (SAC/TC 133). It was issued on 29 December 2017 and has applied since 1 July 2018.

Found what you need?

Document preview — GB/T 35108-2017

National Standard of the People's Republic of China

ICS
65.100
Classification
G 23

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Terms and definitions
  • 3 Test methods

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the method of determination of mineral oil mass fraction, the relative range of carbon number of normal paraffins and the average carbon number and non-sulfonated content.

This standard applies to mineral oil pesticides refined mineral oil and its products in the mineral oil mass fraction, the relatively n-alkanes carbon number difference, phase Determination of average carbon number and non-sulfonated content of n-paraffins (applicable to refined mineral oil only).

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Mineral oil

A mixture of isoparaffins, naphthenes and aromatic hydrocarbons generally consists of three types of compounds.

3 Test methods

3.1 Determination of mineral oil mass fraction method

3.1.1 Method summary

The sample was dissolved in chloroform, di-n-octyl phthalate as an internal standard, using OV-1701 as a capillary wall capillary chromatography Ionization and hydrogen flame ionization detector detection, mineral oil gas chromatography separation and determination, internal standard method.

3.1.2 Reagents and solutions

Trichloromethane;

Mineral oil standard. Refined mineral oil, known mass fraction, omega >= 99.0%, the logo should also provide a relatively n-alkane carbon range (<=8), the relative average n-alkane carbon number (between 21 ~ 24), non-sulfonated content (>=92%); which is relatively n-alkane carbon number range The average carbon number of the difference and the relative n-alkanes are all in one decimal place;

Internal standard. Dioctyl phthalate, there should be no interference analysis of impurities;

Internal standard solution Weigh 1.0g of di-n-octyl phthalate, placed in 250mL volumetric flask, dissolved in chloroform and diluted to engraved Degree, shake, spare.

Note that the relative range of n-alkanes in mineral oil standards is different from that of n-alkanes and the average carbon number of n-alkanes should be consistent with the test substance.

3.1.3 Instruments

Gas chromatograph with flame ionization detector, split/splitless inlet;

Chromatography data processor or workstation;

Column: 30m x 0.32mm (ID) capillary column, bonded OV-1701 quartz capillary column, the thickness of 0.25µm;

Micro-injector: 10µL.

3.1.4 Gas chromatographic operating conditions

Temperature.The column temperature starting temperature of 80 °C, holding 2min, heating rate of 15 °C/min, the final temperature of 270 °C, holding 12min, vaporization chamber

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 35108-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35108-2017

$145.00