GB/T 35030-2018Determination methods for launching height,launching deflection angle and radiation radius of fireworks (English PDF)
烟花发射高度、发射偏斜角、辐射半径测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35030-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
December 1, 2018
Scope
GB/T 35030-2018 is the English-translated version of 烟花发射高度、发射偏斜角、辐射半径测定方法.
GB/T 35030-2018 sets out how to measure three flight characteristics of fireworks when they are fired: the launching height, the launching deflection angle from the vertical and the radiation radius of the burst.
It applies to rising fireworks, aerial shells and combination fireworks, and the launching height method also applies to fountain-type products. The standard defines these three quantities and the imaging terms used in the measurement, the charge-coupled device and the area array CCD camera, and draws on the terms of GB 10631, GB 19593 and GB 19594.
It also refers to GB 50161 on the safe design of fireworks works. Testing and inspection centres and manufacturers use it to check how fireworks products behave when set off. It was issued on 14 May 2018 and has applied since 1 December 2018.
Found what you need?
Document preview — GB/T 35030-2018
National Standard of the People's Republic of China
- ICS
- 71.100.30
- Classification
- Y 88
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the fireworks launch height, launch skew angle, and radiation radius measurement method.
This standard is applicable to the determination of the launch height, launch skew angle, and radiation radius of firework lifting, fireworks, and combination fireworks products when they are fired; Sprinklers discharge firing height determination.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
GB 10631 Firecracker Safety and Quality
GB 19593 Fireworks Fireworks Combination Fireworks
GB 19594 fireworks and fireworks
GB 50161 Fireworks and Firecracker Engineering Design Safety Code
3 Terms and Definitions
The following terms and definitions as defined by GB 10631, GB 19593 and GB 19594 apply to this document.
3.1 Launch height
When the product is discharged, the body or effect (piece) launches to the highest effect height or explosion point height.
3.2 Launch skew angle
The angle at which the body or effect (piece) launches off the vertical line of the horizontal plane when the product is discharged.
3.3 Radiation radius
When the product is discharged, the main body or effect (piece) is lifted to the maximum distance from the explosion point when the explosion occurs.
3.4 Charge-coupled device (CCD)
A semiconductor device that converts optical images into digital signals.
3.5 Area array CCD camera
The area array CCD is a two-dimensional image sensor that can directly convert a two-dimensional image into a video signal output, which is according to a certain square The one-dimensional linear array CCD photosensitive cells and shift registers are arranged in a two-dimensional area array CCD. CCD camera CCD camera device, device The driver circuit, image processing circuit, and power supply circuit are integrated, and the full TV signal is output directly.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 35030-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 10631-2025 — Fireworks - Safety and quality
GB 19593-2015 — Fireworks - Batteries and combinations
GB 50161-2022 — Fireworks and firecrackers engineering design safety standards
Secure payment via Stripe
Payments accepted
GB/T 35030-2018
$185.00