Valid

GB/T 35009-2018Specification for serial NAND flash interface (English PDF)

串行NAND型快闪存储器接口规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (25 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35009-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 15, 2018

Implementation date

August 1, 2018

Scope

GB/T 35009-2018 is the English-translated version of 串行NAND型快闪存储器接口规范.

GB/T 35009-2018 is the Chinese national interface specification for serial NAND flash memory devices. It defines the physical interface, starting with the function of each terminal and the data interface types, and the memory array architecture, including the status register, the device protection functions and a device self-destruction function.

It then sets out the instruction set, what each instruction means and the instruction format modes, and describes the parameter table with its header and parameter list definitions.

Terms such as one-time programmable (OTP) area and error correction code (ECC) are defined, and an informative annex covers the block protection (BP) method. It applies to the design and use of serial NAND flash memory, was issued on 15 March 2018 and has applied since 1 August 2018.

Found what you need?

Document preview — GB/T 35009-2018

National Standard of the People's Republic of China

ICS
31.200
Classification
L 56

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Physical Interface
  • 4.1 Terminal Function Definition
  • 4.2 Data Interface Type
  • 5 Storage Array Architecture
  • 5.1 Storage Architecture
  • 5.2 Status Register
  • 5.3 Device Protection Functions
  • 5.4 Device Self-destruction Function
  • 6 Instruction Definition
  • 6.1 Instruction Set Description
  • 6.2 Instruction Set Description
  • 6.3 Instruction Format Mode
  • 7 Parameter Table Description
  • 7.1 Parameter Header Definition
  • 7.2 Parameter List Definition
  • Appendix A (Informative) Block Protection (BP) Method

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the physical interface, memory array architecture, and instructions for serial and NAND flash memory (hereafter referred to as devices). Meaning and parameter table descriptions, etc.

This standard applies to the design and use of serial NAND flash memory.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.

GB/T 17574-1998 Semiconductor device integrated circuit Part 2. Digital integrated circuits

3 Terms and definitions

The terms and definitions defined in GB/T 17574-1998 and the following terms apply to this document.

3.1 Status register

Internal register of internal memory register.

3.2 One-time programmable

Only one memory area can be programmed in the memory. Once this area is programmed once, it cannot be modified again.

3.3 Error correction code

An error correction method that can improve the reliability of a flash memory.

4 Physical interface

4.1 Terminal Function Definition

The definition of the device's terminal functions is shown in Table 1. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 35009-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
25 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35009-2018

$385.00