Valid

GB/T 35006-2018Semiconductor integrated circuits—Measuring method of level converter (English PDF)

半导体集成电路 电平转换器测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (26 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35006-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 15, 2018

Implementation date

August 1, 2018

Scope

GB/T 35006-2018 is the English-translated version of 半导体集成电路 电平转换器测试方法.

GB/T 35006-2018 sets out how to test semiconductor integrated circuit level converters, also known as level shifters.

It covers the functional test and the static parameters: input clamping voltage, input and output high and low voltages and currents, high-impedance output currents, quiescent current, output short-circuit currents, on-resistance and channel offset resistance.

The dynamic tests cover supply current, maximum and minimum operating frequency, input and output capacitance, propagation delays between low, high and high-impedance states, output transition times, and the eye height, eye width, deterministic, random and total jitter of the output.

It also defines the test environment and terms such as device under test, load board and reference level. It is written for those who test these devices, including on automatic test equipment. It was issued on 15 March 2018 and has applied since 1 August 2018.

Found what you need?

Document preview — GB/T 35006-2018

National Standard of the People's Republic of China

ICS
31.200
Classification
L 56

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General
  • 4.1 Test Environment Requirements
  • 4.2 Test Considerations
  • 5 Functional Test
  • 5.1 Purpose
  • 5.2 Test principle diagram
  • 5.3 Test Procedure
  • 5.4 Test Condition
  • 6 Static Parameter Test
  • 6.1 Input Clamping Voltage (VIK)
  • 6.2 Input High Level Voltage (VIH)
  • 6.3 Input Low Level Voltage (VIL)
  • 6.4 Output High Voltage (VOH)
  • 6.5 Output Low-Voltage (VOL)
  • 6.6 Input High Level Current (IIH)
  • 6.7 Input Low Current (IIL)
  • 6.8 Output High-Level Current (IOH)
  • 6.9 Output Low-Level Current (IOL)
  • 6.10 High-level Current Output in High-Z (IOZH)
  • 6.11 Output Low-Z Current (IOZL) at High Impedance
  • 6.12 Quiescent Current (ICCQ)
  • 6.13 Current Offset (deltaICCQ)
  • 6.14 Output Ground Short Circuit Current (IOSL)
  • 6.15 Output Short-to-Supply Current (IOSH)
  • 6.16 Turn on Resistance (RON)
  • 6.17 Channel Offset Resistance (deltaRON)
  • 7 Dynamic Parameter Test
  • 7.1 Supply Current (ICC)
  • 7.2 Maximum operating frequency (fMAX)
  • 7.3 Minimum operating frequency (fMIN)
  • 7.4 Input Capacitor (CI) and Output Capacitor (CO)
  • 7.5 Output from Low Level to High Level Transmission Delay (tPLH)
  • 7.6 Output High to Low Transmission Delay (tPHL)
  • 7.7 Output Transmission Delay from High-Z to High-Level (tPZH)
  • 7.8 Output from High Impedance to Low Transmission Delay (tPZL)
  • 7.9 Output from High Level to High Impedance Transmission Delay (tPHZ)
  • 7.10 Output from Low Level to High Impedance Transmission Delay (tPLZ)
  • 7.11 Output Transition from Low Level to High Level (tTLH)
  • 7.12 Output Transition from High Level to Low Level (tTHL)
  • 7.13 Eye Height (eH)
  • 7.14 Eye Width (eW)
  • 7.15 Deterministic Jitter (Dj)
  • 7.16 Random Jitter (Rj)
  • 7.17 Total Jitter

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the test methods for the function, static parameters and dynamic parameters of a semiconductor integrated circuit level shifter (hereinafter referred to as a device).

This standard applies to the test of the function, static parameters and dynamic parameters of the level converter of semiconductor integrated circuits.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.

GB/T 17574-1998 Semiconductor device integrated circuit Part 2. Digital integrated circuits

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Device under test (DUT)

Tested object during the test.

3.2 Test adapter board

Adapter plate or application test board for the connection of the device under test to the automatic test system (ATE).

3.3 Reference level

During the test, a threshold level inherent to the input and output devices of the test system was tested.

3.4 Eye diagram

The result of the bit stream of the collected serial signal is cumulatively displayed in an afterglow manner. The superimposed figure is an eyelet.

3.5 Eye height

The amplitude of the eye opening in the vertical direction.

3.6 Eye width

The amplitude of the eye opening in the horizontal direction.

3.7 Jitter

The short-term deviation of the signal at a certain moment relative to its ideal time position.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 35006-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
26 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35006-2018

$415.00