GB/T 34996-2017Specification of the 800/900MHz radio frequency identification reader/writer equipment (English PDF)

1 Scope

This standard specifies the technical requirements of 840MHz ~ 845MHz, 920MHz ~ 925MHz RFID reader/writer device, the test side

Law and quality assessment procedures and marking, packaging, storage and transportation requirements.

This standard applies to 840MHz ~ 845MHz, 920MHz ~ 925MHz RFID reader/writer equipment design, production, testing

And acceptance.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

Information technology - Information exchange - Seven - digit coded character set

GB/T 2312 Information exchange with Chinese character encoding character set basic set

GB/T 2421.1 Electrical and Electronic Products Environmental Testing Overview and Guidelines

GB/T 2422 Environmental test methods for the preparation of guideline terms and definitions

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature

GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods Test Cab. Constant hot and humid test

GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidelines Impact

GB/T 2423.6-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Eb and guidelines Collision

GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall

GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)

GB/T 2828.1 Sampling procedures for inspection - Part 1. Batch-by-lot inspection sampling plan retrieved by acceptance quality limit (AQL)

GB/T 4208-2008 enclosure protection (IP code)

GB/T 4857.2-2005 Packaging - Transport packages - Basic test - Part 2 - Temperature and humidity conditioning

Information technology - Equipment safety - Part 1. General requirements

GB/T 5007.1 Information technology Chinese character encoding character set (basic set) 24 dot matrix font

GB/T 5007.2 Information technology Chinese character encoding character set (auxiliary set) 24 dot font Arial

GB/T 5080.7 equipment reliability test under constant failure rate under the assumption of failure rate and MTBF validation test program

GB/T 5199 Information Technology Chinese character encoding character set (basic set) 15 × 16 dot matrix font

Information technology vocabularies - Part 14. Reliability, maintainability and availability

GB/T 6107-2000 serial binary data exchange using data terminal equipment and data circuit termination interface between devices

Radio disturbance limits and methods of measurement for information technology equipment GB/T 9254-2008

GB/T 9969 Industrial Products Manual General

GB/T 11460 Information technology Chinese font requirements and test methods

GB/T 16793.1 Information technology common multi-octet encoding character set (CJK Unicode) 24 dot matrix font Part 1. Times New Roman

Information technology equipment - Immunity limits and methods of measurement GB/T 17618-1998 […]