Valid

GB/T 38668-2020Intelligent manufacturing－Radio frequency identification system—General technical requirements (English PDF)

智能制造射频识别系统通用技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38668-2020 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 28, 2020

Implementation date

November 1, 2020

Scope

GB/T 38668-2020 is the English-translated version of 智能制造射频识别系统通用技术要求.

GB/T 38668-2020 is the Chinese standard "Intelligent manufacturing - Radio frequency identification system - General technical requirements".

Its scope clause reads: This Standard specifies the composition of intelligent manufacturing-oriented radio frequency identification system, as well as the general technical requirements for RFID tag, reader-writer and middleware, etc. This Standard is applicable to the design, development and application of intelligent manufacturing-oriented radio frequency identification system.

Its clauses include terms and definitions; abbreviations; system composition; general requirements for rfid system. It was issued by the State Administration for Market Regulation on APRIL 28, 2020 and took effect on NOVEMBER 1, 2020.

Found what you need?

Document preview — GB/T 38668-2020

National Standard of the People's Republic of China

ICS: 35.240.50
Classification: L 64

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword3
1 Scope4
2 Normative References4
3 Terms and Definitions5
4 Abbreviations5
5 System Composition6
6 General Requirements for RFID System7

1 Scope

This Standard specifies the composition of intelligent manufacturing-oriented radio frequency identification system, as well as the general technical requirements for RFID tag, reader-writer and middleware, etc.

This Standard is applicable to the design, development and application of intelligent manufacturing-oriented radio frequency identification system.

2 Normative References

The following documents are indispensable to the application of this document. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document.

GB/T 6107-2000 Interface between Data Terminal Equipment and Data Circuit Terminating Equipment Employing Serial Binary Data Interchange

GB/T 29261.3-2012 Information Technology - Automatic Identification and Data Capture (AIDC) Techniques - Vocabulary - Part 3: Radio-frequency Identification

GB/T 29266-2012 Radio Frequency Identification - 13.56 MHz Tag Basic Electrical Characteristics

GB/T 29768-2013 Information Technology - Radio Frequency Identification - Air Interface Protocol at 800/900 MHz

GB/T 32830.3-2016 Manufacturing Process for Equipment Manufacturing - Radio Frequency Identification - Part 3: System Application Interface Specification

GB/T 33848.3-2017 Information Technology - Radio Frequency Identification - Part 3: Parameters for Air Interface Communications at 13.56 MHz

GB/T 34047-2017 Reference Architecture of Information Integration Middleware Platform for Internet of Things in Manufacturing Processes

GB/T 34996-2017 Specification of the 800/900 MHz Radio Frequency Identification

c) The user area shall have the functions of data storage, data writing and data reading. The format of the stored data shall comply with the requirements of GB/T 38670-2020;

d) In accordance with the demands of the application scenario, the integration with the sensor shall be implemented;

e) It shall have relatively strong anti-interference against the metal environment and electromagnetic interference in the application scenario;

f) The installation mode shall be firm; the installation position shall not affect the manufacturing activities;

g) In accordance with different application scenarios of intelligent manufacturing, HF tag or UHF tag may be selected. The air interface protocol of the HF tag shall comply with the requirements of GB/T 33848.3-2017; the electrical characteristics shall comply with the requirements of GB/T 29266-2012. The air interface protocol of the UHF tag should comply with the requirements of GB/T 29768-2013; the other performances shall comply with the requirements of GB/T 36365-2018.

6 General Requirements for RFID System

6.3 RFID Reader-writer

The requirements for RFID reader-writer are as follows:

a) It shall have the functions of normal inventory, reading and / or re-writing tag data, etc.;

b) The storage capacity and data retention time of the memory shall be indicated in the product instruction;

c) It shall have the capability of offline working;

d) It shall have the function of industrial field bus access;

e) It shall have the function of filtering the read tag data and screening redundant information in accordance with the set filtering conditions;

f) It shall have the function of communicating with the middleware; it shall have the capability of uploading reading information, statistical information and fault information to the middle; it shall have the function of receiving the middleware's configuration management information;

g) It shall have interface functions, such as: information query, parameter configuration, device instructions, reading and writing commands, and status report, etc. In terms of parameter configuration, it shall implement configuration management on the air interface parameters and network […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 25109.5-2026|GB/T 47018-2026|GB/T 47019-2026|GB/T 47021-2026|GB/T 47118-2026|GB/T 47461-2026

How to Download GB/T 38668-2020

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.