GB/T 34971-2017Guide for gaseous effluent handling in semiconductor industry (English PDF)
半导体制造用气体处理指南
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34971-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
February 1, 2018
Scope
GB/T 34971-2017 is the English-translated version of 半导体制造用气体处理指南.
GB/T 34971-2017 is a guide to handling the gases given off in semiconductor manufacturing. Clause 1 states that the standard specifies the principle and the technology of the gas emission system for semiconductor manufacturing, and that it applies to gas processing in the manufacture of semiconductors.
As the draft shows it, the document is arranged without a normative references clause, Scope is followed by Terms and definitions, then Abbreviations, then the general rules.
The terms clause defines efficiency, as the ratio of chemical species removed to their volume delivered, end-of-pipe abatement, as abatement technology usable at the emission point of an exhaust gas treatment system, point-of-use abatement, as abatement technology usable at the discharge point of the gas emission devices of semiconductor process equipment, and removal capacity.
The abbreviations clause lists CVD for chemical vapor deposition, EPI for epitaxial deposition, LEL for lower explosive limits, LPCVD for low pressure chemical vapor deposition, OEL for occupational exposure limits, PECVD for plasma enhanced chemical vapor deposition, PFC for perfluorocompounds, POU for point of use, RTP for rapid heat treatment and VOC for volatile organic compounds.
The general rules clause opens on the point that many processes may discharge gas mixtures and that harmful substances may also be produced in the exhaust pipe, and the draft breaks off there, so nothing further of that clause can be reported.
The foreword records that the standard is proposed and managed by the National Semiconductor Equipment and Materials Standardization Technical Committee (SAC/TC203). It was issued on 1 November 2017 and has applied since 1 February 2018.
Found what you need?
Document preview — GB/T 34971-2017
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Classification
- G 86
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Terms and definitions
- 3 Abbreviations
- 4 General rules
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the principle and technology of gas emission system for semiconductor manufacturing.
This standard applies to the manufacture of semiconductor gas processing.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Efficiency
The ratio (fraction or ratio) of chemical species removed to their volume delivered.
2.2 Pipe end emission reduction
end-of-pipeabatement Abatement technologies that can be used at the emission point of an exhaust gas treatment system.
2.3 Point-of-use abatement
Abatement technology that can be used at the point of discharge of gas emission devices from semiconductor process equipment.
2.4 Removal capacity
A substance can be removed by the amount.
3 Abbreviations
The following abbreviations apply to this document.
CVD. Chemical Vapor Deposition
EPI. Epitaxial Deposition
LEL. Lower Explosive Limits
LPCVD. Low Pressure Chemical Vapor Deposition
OEL. Occupational exposure limits (Ocupational Exposure Limit)
PECVD. Plasma enhanced chemical vapor deposition (PlasmaEnhancedChemicalVaporDeposition)
PFC. Perfluorocompounds
POU. PointOfUse
RTP. Rapid Heat Treatment (RapidThermalProcess)
VOC. Volatile Organic Compounds
4 General rules
4.1 Many processes may discharge the gas mixture may also be produced in the exhaust pipe of harmful substances.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34971-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34971-2017
$295.00