GB/T 34928-2017Load commutated soft-start device (English PDF)
负载换相型软起动装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34928-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34928-2017 is the English-translated version of 负载换相型软起动装置.
GB/T 34928-2017 is the Chinese standard "Load commutated soft-start device". Its scope clause reads: This standard specifies the load commutation type soft starter (hereinafter referred to as the device) system integration and model naming, technical requirements, test side Law, inspection rules, marking, packaging, transportation and storage.
This standard applies to rated input AC voltage 6kV ~ 10kV, rated input frequency of 50Hz or 60Hz three-phase AC synchronization Motor with commutation type soft start device. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34928-2017
National Standard of the People's Republic of China
- ICS
- 29.200
- Classification
- K 46
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Load commutation
- 3.2 Synchronous soft start
1 Scope
This standard specifies the load commutation type soft starter (hereinafter referred to as the device) system integration and model naming, technical requirements, test side
Law, inspection rules, marking, packaging, transportation and storage.
This standard applies to rated input AC voltage 6kV ~ 10kV, rated input frequency of 50Hz or 60Hz three-phase AC synchronization
Motor with commutation type soft start device.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 311.1-2012 Insulating coordination Part 1. Definitions, principles and rules
Electric control equipment GB/T 3797-2016
GB/T 3859.1-2013 General requirements for semiconductor converter and commutation converter - Part 1-1 - Basic requirements specification
GB/T 3859.3 Semiconductor converter general requirements and grid commutation converter Part 1-3. Transformers and reactors
GB/T 4025 man-machine interface logo identifies the basic and safety rules operating rules
GB/T 4208-2017 enclosure rating (IP code)
GB/T 4588.1 metal-free single-sided PCB printed circuit board sub-standard
GB/T 4588.2 metal double-sided printed circuit board with a sub-standard
GB/T 4798.2 electrical and electronic product application environmental conditions Part 2. Transport
GB/T 7947 man-machine interface signs the basic and safety rules of conductor color or alphanumeric identification
GB/T 11022-2011 high-voltage switchgear and control equipment standards common technical requirements
GB/T 12668.3 speed control electrical transmission system Part 3. Electromagnetic compatibility requirements and specific test methods
GB/T 12668.4-2006 speed control electrical transmission system Part 4. General requirements AC voltage 1000V but not over
Over 35kV AC speed electrical transmission system rating requirements
Low voltage switchgear and controlgear - Part 1. General
GB/T 33595-2017 motor soft starter model preparation methods
General technical requirements for soft starters GB/T Code for design of 3 ~ 110kV high voltage power distribution unit
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Load commutation
Commutation by the power provided by the AC load.
3.2 Synchronous soft start
Motor soft-start, the motor shaft speed and motor stator frequency of the process.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34928-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34928-2017
$235.00