Valid

GB/T 34927-2017Motor soft-start device-General technical specifications (English PDF)

电动机软起动装置 通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34927-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34927-2017 is the English-translated version of 电动机软起动装置 通用技术条件.

GB/T 34927-2017 is the Chinese standard "Motor soft-start device-General technical specifications". Its scope clause reads: This standard specifies the basic parameters of the motor soft starter, technical requirements, test methods, inspection rules, nameplate and packaging and Storage and transportation.

This standard applies to non-explosive atmospheres used in the environment, the rated voltage of 10kV and below the motor soft starter (Hereinafter referred to as device). Its clauses include basic parameters.

Found what you need?

Document preview — GB/T 34927-2017

National Standard of the People's Republic of China

ICS
29.200
Classification
K 46

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 basic parameters
  • 3.1 Rated power
  • 3.2 Rated voltage
  • 3.3 Rated current
  • 3.4 Rated frequency
  • 4 technical requirements
  • 4.1 Environmental conditions
  • 4.2 Cooling
  • 4.3 General Requirements
  • 4.4 PCB
  • 4.5 shock protection
  • 4.6 housing protection class
  • 4.7 man-machine interface logo
  • 4.8 Electrical Performance
  • 4.9 protection function
  • 4.10 temperature rise
  • 4.11 Noise
  • 4.12 Electromagnetic compatibility
  • 4.13 Dielectric properties
  • 4.14 Ground
  • 5 test methods
  • 5.1 General test
  • 5.2 PCB inspection
  • 5.3 electric shock protection test
  • 5.4 enclosure protection level test
  • 5.5 man-machine interface mark logo test
  • 5.6 Electrical performance test
  • 5.7 protection function test
  • 5.8 temperature test
  • 5.9 Noise Measurement
  • 5.10 Electromagnetic compatibility test
  • 5.11 Dielectric properties test
  • 5.12 ground test
  • 6 inspection rules
  • 6.1 test classification
  • 6.2 inspection items
  • 7 nameplate and packaging
  • 7.1 nameplate
  • 7.2 Packaging
  • 8 storage and transportation

1 Scope

This standard specifies the basic parameters of the motor soft starter, technical requirements, test methods, inspection rules, nameplate and packaging and

Storage and transportation.

This standard applies to non-explosive atmospheres used in the environment, the rated voltage of 10kV and below the motor soft starter (Hereinafter referred to as device).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 156 standard voltage

GB/T 3047.1 height 20mm panel, frame and cabinet basic size series

Electric control equipment GB/T 3797-2016

3.6kV ~ 40.5kV AC metal - enclosed switchgear and controlgear GB/T 3906-2006

GB/T 4026 man-machine interface signs the basic and safety rules Identification of equipment terminals and conductor terminal

GB/T 4205 man-machine interface logo basic and safety rules of operation rules

GB/T 4208 enclosure protection (IP code)

GB/T 4588.1 non-metallic hole single-sided printed board sub-specification

GB/T 4588.2 metal with single-sided double-sided printed board sub-specification

GB/T 7251.1-2013 Low-voltage switchgear and control equipment - Part 1. General

GB/T 13384 mechanical and electrical product packaging General technical conditions

Low voltage switchgear and controlgear - Part 1. General

GB/T 17045-2008 shock protection devices and equipment common part

Industrial machinery - Protective earthing system for electrical equipment - Continuity test code

3 basic parameters

3.1 Rated power

The rated power of the unit should be scaled by the power of the motor being driven.

3.2 Rated voltage

Device and the motor stator loop connection, the rated voltage shall comply with the provisions of GB/T 156. According to the motor voltage, the main device

Loop rated voltage should be selected among the following voltages. 0.38kV, 0.66kV, 1.14kV, 3kV, 6kV, 10kV.

3.3 Rated current

When the device is connected to the motor rotor circuit, the rated current should be scaled by the rotor current of the motor being driven and selected in Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34927-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34927-2017

$205.00