Valid

GB/T 34900-2017Micro-electromechanical system technology—Measuring method for residual strain measurements of MEMS microstructures using an optical interferometer (English PDF)

微机电系统(MEMS)技术 基于光学干涉的MEMS微结构残余应变测量方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34900-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34900-2017 is the English-translated version of 微机电系统(MEMS)技术 基于光学干涉的MEMS微结构残余应变测量方法.

GB/T 34900-2017 is the Chinese standard "Micro-electromechanical system technology—Measuring method for residual strain measurements of MEMS microstructures using an optical interferometer".

Its scope clause reads: This standard specifies the method of residual strain measurement based on the surface morphology of micro double ended fixed-beam structure obtained by optical interference microscope.

This standard applies to the surface reflectance of not less than 4% and the use of optical interference microscope to obtain the surface morphology of micro-double-ended beam structure. Its clauses include terms and definitions; measurement method.

Found what you need?

Document preview — GB/T 34900-2017

National Standard of the People's Republic of China

ICS
31.200
Classification
L 55

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 measurement method
  • 5 main factors affecting the measurement uncertainty
  • Appendix A (informative) Optical interference microscope typical form and main technical features
  • Appendix B (Normative) Fitting cosine functions of surface contour lines and calculating deformations

1 Scope

This standard specifies the method of residual strain measurement based on the surface morphology of micro double ended fixed-beam structure obtained by optical interference microscope.

This standard applies to the surface reflectance of not less than 4% and the use of optical interference microscope to obtain the surface morphology of micro-double-ended beam structure.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 3505 Geometrical product specifications (GPS) Surface texture contouring Terms, definitions, and surface texture parameters

GB/T 26111 Microelectromechanical System (MEMS) technology terminology

General principles of microgeometry assessment of microelectromechanical systems (MEMS) GB/T 26113

GB/T 34893-2017 Microelectromechanical System (MEMS) technology MEMS micro-structure in-plane length measurement based on optical interference method

3 Terms and definitions

GB/T 3505, GB/T 26111 and GB/T 34893-2017 as defined by the following terms and definitions apply to this document.

3.1 Residual strain

Exist in the material, the structure due to plastic deformation, uneven temperature distribution, the formation of non-uniform phase transition and maintain a balance of internal strain.

4 measurement method

4.1 General

4.1.1

micro-double-ended beam due to the process of introducing residual stress, resulting in bending deformation of the beam structure, obtained by measuring the bending deformation

Residual strain in the micro-double-ended beam is shown in Fig.1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34900-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34900-2017

$205.00