GB/T 34894-2017Micro-electromechanical system technology—Measuring method for strain gradient measurements of MEMS microstructures using an optical interferometer (English PDF)
微机电系统(MEMS)技术 基于光学干涉的MEMS微结构应变梯度测量方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34894-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34894-2017 is the English-translated version of 微机电系统(MEMS)技术 基于光学干涉的MEMS微结构应变梯度测量方法.
GB/T 34894-2017 is the Chinese standard "Micro-electromechanical system technology—Measuring method for strain gradient measurements of MEMS microstructures using an optical interferometer".
Its scope clause reads: This standard specifies the method of strain gradient measurement based on the surface topography of micro-cantilever structure obtained by optical interference microscope.
This standard applies to the surface reflectance of not less than 4% and the use of optical interference microscope surface morphology cantilever micro-cantilever structure. Its clauses include terms and definitions; measurement method.
Found what you need?
Document preview — GB/T 34894-2017
National Standard of the People's Republic of China
- ICS
- 31.200
- Classification
- L 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 measurement method
- 5 main factors affecting the measurement uncertainty
- Appendix A (informative) Optical interference microscope typical form and main technical features
1 Scope
This standard specifies the method of strain gradient measurement based on the surface topography of micro-cantilever structure obtained by optical interference microscope.
This standard applies to the surface reflectance of not less than 4% and the use of optical interference microscope surface morphology cantilever micro-cantilever structure.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 3505 Geometrical product specifications (GPS) Surface texture contouring Terms, definitions, and surface texture parameters
GB/T 26111 Microelectromechanical System (MEMS) technology terminology
General principles of microgeometry assessment of microelectromechanical systems (MEMS) GB/T 26113
GB/T 34893-2017 Microelectromechanical System (MEMS) technology MEMS micro-structure in-plane length measurement based on optical interference method
3 Terms and definitions
GB/T 3505, GB/T 26111 and GB/T 34893-2017 as defined by the following terms and definitions apply to this document.
3.1 Strain gradient
Structural changes in the length of the unit of change in value.
4 measurement method
4.1 General
4.1.1
Cantilevers are the most commonly used measurement structures for the measurement of film mechanical properties, such as micro-cantilevers made from surface-based MEMS processes,
In the past, sacrificial layer release structure layer to achieve the movable structure. In the residual stress, the release of the micro-cantilever structure will produce bending deformation (such as
Figure 1), the strain of the microcantilever is measured by measuring the deformation of the cantilever.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34894-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34894-2017
$205.00