GB/T 34847-2017General technical requirements of polyethylene barrier (English PDF)
聚乙烯隔离墩通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34847-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34847-2017 is the English-translated version of 聚乙烯隔离墩通用技术条件.
GB/T 34847-2017 is the Chinese standard "General technical requirements of polyethylene barrier".
Its scope clause reads: This standard specifies the terms and definitions, classification and structure, materials, requirements, test methods, inspection of polyethylene isolated pier (referred to as the isolation pier) Rules, marking, packaging, shipping and storage.
This standard applies to polyethylene as the main raw material, using rotational molding or blow molding made of the use of temperature at -40 °C ~ 65 °C Insulation pier in the area.
Isolation pier manufactured by other molding process may refer to this standard. Its clauses include terms and definitions; classification and structure.
Found what you need?
Document preview — GB/T 34847-2017
National Standard of the People's Republic of China
- ICS
- 93.080.01
- Classification
- R 18
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Categories and Structure
- 5 material
- 6 Requirements
- 7 test method
- 9 logo, packaging, transportation and storage
- Appendix A (Normative) Anti-collision performance
1 Scope
This standard specifies the terms and definitions, classification and structure, materials, requirements, test methods, inspection of polyethylene isolated pier (referred to as the isolation pier)
Rules, marking, packaging, shipping and storage.
This standard applies to polyethylene as the main raw material, using rotational molding or blow molding made of the use of temperature at -40 °C ~ 65 °C
Insulation pier in the area. Isolation pier manufactured by other molding process may refer to this standard.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1033.1-2008 Plastics - Determination of density of non-foamed plastics - Part 1. Immersion method, liquid pyknometer method and titration method
GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2. Test conditions for molding and extrusion of plastics
Plastics - Determination of burning behavior - Horizontal and vertical methods
GB/T 2828.1-2012 Sampling procedures for inspection - Part 1 - Batch-by-lot inspection by acceptance quality limit (AQL) plan
GB/T 2918-1998 plastic sample conditioning and testing of the standard environment
Plastics - Determination of the impact temperature brittleness GB/T 5470-2008
Visual signal surface color
GB/T 15596-2009 Determination of changes in color and properties of plastics under sunlight, natural weather or laboratory exposure to light under glass
GB/T 16422.2-2014 Plastics - Laboratory exposure test methods - Part 2. Xenon arc lamps
Road traffic reflective film
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Polyethylene polyethylene pierrier
A road traffic separation facility, made of polyethylene, with water injection, is located on highways, urban roads and street junctions
Place, a safety barrier that divides the road or forms a barrier.
4 classification and structure
4.1 Classification
In accordance with the different uses of the product is divided into three categories, see Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34847-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34847-2017
$205.00