Valid

GB/T 34813-2017Meteorological grades of water-saving irrigation—Soybean (English PDF)

作物节水灌溉气象等级 大豆

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34813-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

November 1, 2017

Scope

GB/T 34813-2017 is the English-translated version of 作物节水灌溉气象等级 大豆.

GB/T 34813-2017 sets the meteorological grades for water-saving irrigation of soybean. Clause 1 states that the standard specifies the classification of soybean water-saving irrigation meteorological levels and the irrigation quota, and that it applies to the forecasting of, and service for, soybean water-saving irrigation.

The introduction explains that it was prepared from soybean water demand at its different stages and the water deficit rate, combined with the forecast of future precipitation levels, in order to provide timely and targeted soybean water-saving irrigation services, ease the shortage of agricultural water resources and improve the efficiency of farmland water use.

The directory shows a short standard: after the terms and definitions comes a single technical clause, "levels and irrigation quota", followed by a normative Appendix A on the calculation of the soybean moisture deficit rate and a list of references.

Clause 3 prints two definitions under the same name, crop water deficit: the first for the condition in which the crop's water uptake cannot meet its transpiration needs, so that the plant body is short of water and normal physiological activity is hindered, and the second for the quantity, expressed in absolute terms in millimetres, by which the water in the soil layer to the depth of the crop root falls short of the crop water demand over a given period.

It also defines the crop water deficit rate, the share of the crop water requirement that the deficit represents over a given period, expressed as a percentage, crop water-saving irrigation, the meteorological grade of crop water-saving irrigation, which is based on the current crop water deficit rate and the forecast precipitation level for the next three days, and the irrigation quota, the amount of water or depth of water per unit area at a given irrigation, in cubic metres per hectare or millimetres.

The draft breaks off after the last definition, so the grades and quotas of clause 4 are not shown, and the two documents listed in clause 2 appear without their numbers.

The standard carries ICS 07.060 and Chinese classification B18, was proposed by the China Meteorological Administration and is kept by the National Agricultural Meteorology Standardization Technical Committee (SAC/TC539).

It was issued on 1 November 2017 and has applied since 1 November 2017, the page giving the same date in its issue and implementation fields and on the title page.

Found what you need?

Document preview — GB/T 34813-2017

National Standard of the People's Republic of China

ICS
07.060
Classification
B 18

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 levels and irrigation quota
  • Appendix A (Normative) Soybean moisture deficit rate calculation
  • References

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

Introduction

In order to provide timely and targeted soybean water-saving irrigation services, and to effectively alleviate the shortage of agricultural water resources and improve the efficiency of farmland water use Rate, to achieve crop yield-saving crops, based on different stages of soybean water demand and its water deficit rate, combined with the forecast of future precipitation levels, preparation This standard.

1 Scope

This standard specifies the classification of soybean water-saving irrigation meteorological levels and irrigation quota.

This standard applies to forecasting and service of soybean water-saving irrigation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

Wheat drought disaster rating

Technical guideline for determination of irrigation water utilization rate

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Crop water deficit

Crop water absorption can not meet the needs of transpiration, the body of water shortage, hindering the phenomenon of normal physiological activity.

3.2 Crop water shortage

When the crop water deficit occurs, within a certain period of time the depth of the crop root depth of the soil layer of water and crop water demand difference Amount, expressed in absolute terms.

Note: The unit is millimeter (mm).

3.3 Crop water deficit rate

Within a certain period of time, the crop water deficit accounts for the ratio of crop water requirements.

Note: Expressed as a percentage.

3.4 Crop water-saving irrigation

According to different stages of crop water demand and its water deficit situation, to maximize the amount of irrigation water per unit for Appropriate amount of output and output value, appropriate irrigation.

3.5 Crop water-saving irrigation Meteorological grade

Irrigation rates based on current crop water deficit rates and forecast for precipitation levels for the next 3 days.

3.6 Irrigation quotas

The amount of water per unit area or water depth at a given irrigation.

Note: The unit is cubic meter per hectare (m3/hm2) or millimeter (mm).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34813-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34813-2017

$145.00