Valid

GB/T 34725-2017Standard test method for performance of structural wood-based panel under concentrated static and impact loads (English PDF)

结构用人造板集中荷载和冲击荷载性能测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34725-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34725-2017 is the English-translated version of 结构用人造板集中荷载和冲击荷载性能测试方法.

GB/T 34725-2017 is the Chinese standard "Standard test method for performance of structural wood-based panel under concentrated static and impact loads".

Its scope clause reads: This standard specifies the structural use of plywood concentrated load and impact load performance test terms and definitions, sample selection, specimen preparation, test Parts handling, test equipment, specimen installation, test procedures, data logging and test reports.

This standard applies to the use of structural wood-based panels as a building applied to the floor panels and roof panels its concentration load and impact load performance test. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 34725-2017

National Standard of the People's Republic of China

ICS
79.060
Classification
P 23

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Support member
  • 3.2 Around supporting
  • 3.3 The edge does not fully support
  • 3.4 No support for edges
  • 3.5 Guarantee load proofload

1 Scope

This standard specifies the structural use of plywood concentrated load and impact load performance test terms and definitions, sample selection, specimen preparation, test

Parts handling, test equipment, specimen installation, test procedures, data logging and test reports.

This standard applies to the use of structural wood-based panels as a building applied to the floor panels and roof panels its concentration load and impact load performance test.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 18259 Panels and decorative surface terminology

GB 50005 wood structure design specifications

3 Terms and definitions

GB/T 18259 and GB 50005 defined by the following terms and definitions apply to this document.

3.1 Support member

Located in the lower part of the floor or roof panel, supporting the upper load components.

3.2 Around supporting

Floor or roof panels have support members on the lower four sides.

3.3 The edge does not fully support

An opposite side of a floor or roof panel is placed on a support member and the other opposite side is unsupported but without a supporting edge Two floor or roof panels

Through the mouth, end clips or other similar way.

3.4 No support for edges

An opposite side of the floor or roof panel is placed on the support member and the other opposite side is unsupported.

3.5 Guarantee load proofload

A load value used in the load-bearing performance test is to ensure that the structural plywood meets the requirements of the relevant structural safety and is normal

Use the process to maintain structural integrity. The guaranteed load should be determined by both supply and demand based on the intended use, usually between the target use (or

Meter) between the load and the ultimate load.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34725-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34725-2017

$145.00