GB/T 34721-2017Acceptance generality of panel components manufacturing line of panel type furniture (English PDF)
板式家具板件加工生产线验收通则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34721-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34721-2017 is the English-translated version of 板式家具板件加工生产线验收通则.
GB/T 34721-2017 is the Chinese standard "Acceptance generality of panel components manufacturing line of panel type furniture". Its scope clause reads: This standard specifies the terms and definitions, requirements, test methods, inspection and acceptance rules and signs of plate furniture plate processing line.
This standard applies to plate furniture plate processing automation production line (hereinafter referred to as the production line). Its clauses include terms and definitions; requirements.
Found what you need?
Document preview — GB/T 34721-2017
National Standard of the People's Republic of China
- ICS
- 79.120.01
- Classification
- B 97
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 requirements
1 Scope
This standard specifies the terms and definitions, requirements, test methods, inspection and acceptance rules and signs of plate furniture plate processing line.
This standard applies to plate furniture plate processing automation production line (hereinafter referred to as the production line).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 3766 hydraulic drive systems and components of the general rules and safety requirements
GB 5226.1 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General specifications
GB/T 6576 machine lubrication system
GB/T 7932 pneumatic system of general technical conditions
GB 12348 industrial enterprises boundary environmental noise emission standards
GB/T 13306 signs
GB 16297 Integrated Air Pollutants Emission Standard
GB/T 18262 General requirements for wood-based panel machinery
GB/T 18514 General Principles of Mechanical Safety of Wood-Based Panels
GB 50254 Installation of electrical installations low voltage electrical construction and acceptance specifications
GB 50275 fan, compressor, pump installation engineering construction and acceptance criteria
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Panel furniture plate processing production line
By more than one plate furniture processing equipment, through the automatic access to the material or the intermediate transmission equipment connected to the continuous processing of plate furniture panels
The production line, the middle of the separation of the workpiece storage or manual handling of the link.
4 requirements
4.1 General requirements
4.1.1
Production Line All equipment, electrical systems, automatic control devices, safety facilities, hydraulic, pneumatic, dust removal system should be complete, complete, and
Should meet the relevant standards and technical requirements.
4.1.2
Acceptance of production lines, technical information should be complete, standardized and correct, and should be included.
a) production line equipment layout, process flow chart, dust removal system plans and equipment list;
b) The entire production line of the electrical system and pneumatic system diagram, the total installed capacity, compressed air consumption and other parameters;
e) There should be a clear plate processing capacity or transport capacity of the documentation;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34721-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34721-2017
$85.00