Valid

GB/T 34719-2017Standard test method for performance of structural wood-based panel under uniform loads (English PDF)

结构用人造板均布荷载性能测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34719-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34719-2017 is the English-translated version of 结构用人造板均布荷载性能测试方法.

GB/T 34719-2017 is the Chinese standard "Standard test method for performance of structural wood-based panel under uniform loads".

Its scope clause reads: This standard specifies the structural use of artificial board uniform load performance test terms and definitions, sample selection, specimen size, specimen handling, testing Device, test procedure, test result processing and test report.

This standard applies to structural use of artificial board as a building wall panels, floor panels and roofing uniform load test. Its clauses include terms and definitions; sample selection; specimen size.

Found what you need?

Document preview — GB/T 34719-2017

National Standard of the People's Republic of China

ICS
79.060
Classification
B 70

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 sample selection
  • 5 specimen size

1 Scope

This standard specifies the structural use of artificial board uniform load performance test terms and definitions, sample selection, specimen size, specimen handling, testing

Device, test procedure, test result processing and test report.

This standard applies to structural use of artificial board as a building wall panels, floor panels and roofing uniform load test.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 18259 Panels and decorative surface terminology

GB 50005 wood structure design specifications

3 Terms and definitions

GB/T 18259 and GB 50005 defined by the following terms and definitions apply to this document.

3.1 Support member

Located in the wall panels, floor panels or roof panels, the upper part of the load from the supporting role.

3.2 Guarantee load proofload

A load value used in the load-bearing performance test is to ensure that the structural plywood meets the requirements of the relevant structural safety and is normal

Use the process to maintain structural integrity. The guaranteed load should be determined by both supply and demand based on the intended use, usually between the target use (or

Meter) between the load and the ultimate load.

4 sample selection

The sample should be representative of the product batch to be evaluated. Sample selection should be based on the internal structure of the product properties (density, etc.), product thickness

And thickness deviation and other requirements. The size of the number of samples should be able to make the measurement of the performance to the desired level of confidence prevail, and the minimum number of samples should be

Ensure that each test condition test 10 times.

5 specimen size

5.1

should be the required size of the specimen cut into pieces.

5.2

Test piece length direction should be perpendicular to the main support member, the main support member center distance of 2 times.

5.3

specimen width should not be less than 595mm.

5.4

The thickness of the test piece shall be measured under dry conditions and recorded in the test report.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34719-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34719-2017

$85.00