Valid

GB/T 34705-2017Rubber-or plastics-coated fabrics—Determination of oil permeability resistance—Cup method (English PDF)

橡胶或塑料涂覆织物 油扩散性能的测定 杯法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34705-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 34705-2017 is the English-translated version of 橡胶或塑料涂覆织物 油扩散性能的测定 杯法.

GB/T 34705-2017 is the Chinese standard "Rubber-or plastics-coated fabrics—Determination of oil permeability resistance—Cup method". Its scope clause reads: This standard specifies the test method for measuring the oil repellency of rubber or plastic coated fabrics or compounds using the cup method.

This standard applies to single-sided coated fabric, double coated fabric and rubber. Its clauses include principle; test liquid; test device.

Found what you need?

Document preview — GB/T 34705-2017

National Standard of the People's Republic of China

ICS
59.080.40
Classification
G 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 principle
  • 4 test liquid
  • 5 test device

1 Scope

This standard specifies the test method for measuring the oil repellency of rubber or plastic coated fabrics or compounds using the cup method.

This standard applies to single-sided coated fabric, double coated fabric and rubber.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 2941 Rubbery physical test specimen preparation and conditioning procedures

GB/T 3512 vulcanized rubber or thermoplastic rubber hot air accelerated aging and heat test

3 principle

With the test to be coated fabric or film covered test cup cup filled with test liquid, the cup tightly sealed, the test cup inverted provisions

Ventilation under test temperature grid, at intervals of time, through the test cup quality changes, to determine the static pressure test liquid to be measured

Oil spreading rate of test coated fabric or film.

4 test liquid

Test fluids should be specified in the appropriate product standards.

5 test device

5.1 test cup

5.1.1

The test cup shall be made of metallic material that does not affect the properties of the test sample and the test liquid. If no special provisions are made, it is recommended to use aluminum alloy

Material (surface anodized). This standard specifies the two cup type cover type test cup and bolt type test cup.

Note. Two kinds of cups, it is recommended to use the lid type test cup.

5.1.2

lid type test cup structure diagram (see Figure 1).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34705-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34705-2017

$85.00