Valid

GB/T 34451-2017Requirements and guidelines of product quality traceability management for toys (English PDF)

玩具产品质量可追溯性管理要求及指南

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34451-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2017

Implementation date

February 1, 2018

Scope

GB/T 34451-2017 is the English-translated version of 玩具产品质量可追溯性管理要求及指南.

GB/T 34451-2017 is the Chinese standard "Requirements and guidelines of product quality traceability management for toys". Its scope clause reads: This standard specifies the toy product manufacturing process quality traceability management of the basic requirements and guidelines for use.

This standard applies to all types of toys mass production process quality control and traceability management. Its clauses include terms and definitions; quality control requirements.

Found what you need?

Document preview — GB/T 34451-2017

National Standard of the People's Republic of China

ICS
97.200.50
Classification
Y 57

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 quality control requirements
  • 4.1 General
  • 4.2 Personnel Management
  • 4.3 Equipment Management
  • 4.4 Purchasing and Material Control
  • 4.5 Process Control
  • 4.6 Document and model control
  • 4.7 Environmental Management
  • 4.8 test control
  • 4.9 Unqualified product control
  • 4.10 Analysis and Improvement
  • 5 Traceability Management Requirements
  • 5.1 General
  • 5.2 Product Identification Method
  • 5.3 Purchased product identification
  • 5.4 Product Identification of the Production Process
  • 5.5 Identification of the final product
  • 5.6 Traceability Requirements
  • Appendix A (Informative) Sampling procedures and sampling summary
  • Appendix B (informative) toy products for the key processes and quality control requirements
  • Appendix C (informative) toy product factory quality control inspection requirements
  • Appendix D (Informative) Toys Product Identification and Traceability Method Example
  • References

1 Scope

This standard specifies the toy product manufacturing process quality traceability management of the basic requirements and guidelines for use.

This standard applies to all types of toys mass production process quality control and traceability management.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB 6675.1 Safety of toys - Part 1. Basic specifications

GB/T 19000 quality management system foundation and terminology

CNCA-13C Toy Products Compulsory Certification Implementation Rules

3 Terms and definitions

GB/T 19000 and GB 6675.1 defined terms and definitions apply to this document.

4 quality control requirements

4.1 General

4.1.1

Toy manufacturers should be in accordance with national laws and regulations and their own reality, to determine the quality objectives, in accordance with the characteristics and characteristics of toy products,

Plan the production process, determine the conditions under which it is controlled, and prepare quality control documents based on the planned results and controlled conditions.

4.1.2

Toy manufacturers shall determine the scope, content, organizational structure, responsibilities, procedures, methods and resources for the quality control of the production process and shall

According to the requirements of this standard, the quality of the implementation of the production process can be traced to ensure that the production process under controlled conditions.

4.2 Personnel Management

4.2.1 staff capacity

Toy manufacturers in the planning of work, should determine the ability to engage in the work required to meet the product requirements of personnel. Indeed

The ability of individuals to be identified can be demonstrated through a combination of education, training, skills and experience so that they can be trusted when they are assigned work,

This work can not only be done correctly, but it can be done in the best possible way.

Toy manufacturers should regularly evaluate the employees' experience, qualifications and competencies based on their skills and qualifications required for current and future activities

Evaluation. Records should be maintained that demonstrate the competence of the employee.

An analysis of capacity gaps can be carried out by comparing the capabilities of existing staff with those required. The gap can be through training

Make up, or make up for additional capacity by hiring long-term employees or regular contractors.

4.2.2 Training

When planning and identifying the capabilities required to do their job, toy manufacturers can use training as an option to gain the necessary skills […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34451-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34451-2017

$435.00