Valid

GB/T 34450-2017Modularization design for household and similar electrical appliances—General principles (English PDF)

家用和类似用途电器的模块化设计 通则

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34450-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2017

Implementation date

May 1, 2018

Scope

GB/T 34450-2017 is the English-translated version of 家用和类似用途电器的模块化设计 通则.

GB/T 34450-2017 is the Chinese standard "Modularization design for household and similar electrical appliances—General principles".

Its scope clause reads: This standard specifies the terms of modular design of household and similar electrical appliances, the purpose of modular design, principles, methods, modular design Accounting and document management.

This standard applies to household and similar electrical modular design (referred to as the modular design). Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 34450-2017

National Standard of the People's Republic of China

ICS
97.030
Classification
Y 60

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 modular design goals, principles, methods
  • 4.1 Purpose
  • 4.2 Principle
  • 4.3 Method
  • 5 modular design process
  • 5.1 Overview
  • 5.2 Product Architecture Design
  • 5.3 module entity design
  • 5.4 module configuration and matching
  • 5.5 Modular Design Applications for Home Appliances
  • 6 modular design document
  • Appendix A (informative) module classification
  • Appendix B (informative) Module Interface Classification
  • Appendix C (informative) modular design of household appliances
  • Appendix D (informative) modular design process
  • Appendix E (Informative) Examples of Modular Design for Home Appliances
  • Appendix F (informative) modular design documentation principles

1 Scope

This standard specifies the terms of modular design of household and similar electrical appliances, the purpose of modular design, principles, methods, modular design

Accounting and document management.

This standard applies to household and similar electrical modular design (referred to as the modular design).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB 4706.1 Safety of household and similar electrical appliances - Part 1. General requirements

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Module

Can be combined into a product or system (system can be divided), with a certain function and standard interface structure, the typical universal independence unit.

Note 1. The module should have the following characteristics. with relatively independent functions; can be used to achieve specific functional purposes by combination; with a standardized interface to achieve "independence

Site design and production "and so on.

Note 2. Refer to Appendix A for module classification.

3.2 Module Entity

According to the actual function of the module design. The module entity can be either a structural functional entity (such as a mechanical structure) or a software project

Can entity (such as functional circuits), or a combination of the two.

Note. The same module can correspond to multiple module entities and achieve the same function, with the same interface rules, but with different performance.

3.3 Module interface

The parts where the associated modules interact with each other and interact with each other through them (hereinafter referred to as interfaces). Interface contains physical access

Mouth, logical interface and other forms.

Note. Refer to Appendix B for module interface classification.

3.4 Modular design

According to a certain range of market demand and technical requirements, through the functional analysis of the module and the design of module entities, and then the module entity

A combination of developing a single product or series of product design.

3.5 Optimization library

A set of modular entities with a standardized interface for controlling the type of component while meeting the module-specific functions.

Note. The module entities in the preferred library should have specific superior performance, reasonable cost, convenient craftsmanship and so on.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 34450-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34450-2017

$295.00