Valid

GB/T 36925-2018Modularization design for household and similar electrical appliances—Guideline for refrigerator (English PDF)

家用和类似用途电器的模块化 电冰箱的设计导则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 36925-2018 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 28, 2018

Implementation date

December 28, 2018

Scope

GB/T 36925-2018 is the English-translated version of 家用和类似用途电器的模块化 电冰箱的设计导则.

GB/T 36925-2018 is a guideline for the modular design of household refrigerators. It sets out the purpose, principles and methods of modular design, the modular design process, starting from product architecture design, and the modular design documents, largely by applying the general rules of GB/T 34450-2017 to refrigerators.

It defines the refrigerator module, an independent functional unit with clear interfaces that performs a function such as cooling, insulation or preservation; the module variant, its concrete carrier, such as a fixed-frequency or inverter compressor module; and the variable module, which gives products differentiated design and a personalised user experience.

Other refrigerating appliances, such as wine cabinets, can use it for reference. It was issued on 28 December 2018 and has applied since 28 December 2018.

Found what you need?

Document preview — GB/T 36925-2018

National Standard of the People's Republic of China

ICS
97.040.30
Classification
Y 61

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Purpose, principle and method of modular design
  • 5 Modular design process
  • 6 Modular Design Document

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the purpose, principles, methods, modular design flow and modular design documentation of the modular design of the refrigerator.

This standard applies to the modular design of refrigerators (hereinafter referred to as "refrigerators"), other refrigeration appliances such as refrigerators, wine cabinets, etc. can be referred to.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 34450-2017 General rules for modular design of household and similar electrical appliances

3 Terms and definitions

The following terms and definitions defined in GB/T 34450-2017 apply to this document.

3.1 Refrigerator module

Refrigerator products can be combined into a complete product or system (system can be divided), a set of clear interface definitions and achievable refrigerator products Functions (such as cooling, insulation, preservation, etc.) and independent functional units capable of performing specific functions.

3.2 Module entity

The specific functional carrier of the refrigerator module concept.

Note: Refrigerator module entities such as fixed frequency compressor modules, inverter compressor modules.

3.3 Variable module

A module that enables differentiated design goals for refrigerator products and gives users a personalized experience.

4 Purpose, principle and method of modular design

The provisions of Chapter 4 of GB/T 34450-2017 shall be observed.

5 Modular design process

5.1 Overview

The provisions of 5.1 of GB/T 34450-2017 shall be observed.

5.2 Product Architecture Design

5.2.1 Product Architecture Design Process

The provisions of 5.2.1 of GB/T 34450-2017 shall be observed.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 36925-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 36925-2018

$145.00