GB/T 34309-2017Technical manual of the landing typhoon surface boundary layer enhanced observation (English PDF)
登陆台风近地边界层增强观测技术指南
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34309-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 7, 2017
Implementation date
April 1, 2018
Scope
GB/T 34309-2017 is the English-translated version of 登陆台风近地边界层增强观测技术指南.
GB/T 34309-2017 is the Chinese standard "Technical manual of the landing typhoon surface boundary layer enhanced observation".
Its scope clause reads: This standard specifies the selection of the observation environment of the near-surface boundary layer of the typhoon, observation items, instrument performance, installation of observation equipment, data mining Set of technical methods.
This standard applies to landing typhoon near boundary layer enhanced observation. Its clauses include terms; observe the design requirements.
Found what you need?
Document preview — GB/T 34309-2017
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms
- 4 observation design requirements
- 4.1 Observation Elements
- 4.2 Observation Site and Environment
- 5.1 Basic Requirements
- 5.2 Instrument Performance
- 5.3 Instrument Specifications
- 6 Observation Instrument Setup and Site Installation
- 6.1 Observation level set
- 6.2 Observation level layout
- 6.3 Site Installation and Commissioning
- 7 site observation and data collection
- 7.1 Metadata collection
- 7.2 Data Access and Backup
- 7.3 test after the test
- 7.4 Instrument unloading
- Appendix A (informative) observation of the environment and equipment installation records
1 Scope
This standard specifies the selection of the observation environment of the near-surface boundary layer of the typhoon, observation items, instrument performance, installation of observation equipment, data mining
Set of technical methods.
This standard applies to landing typhoon near boundary layer enhanced observation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Specifications for surface meteorological observatories - Part 1. General principles
3 Terms
The following terms and definitions apply to this document.
3.1 Landing typhoon
A tropical cyclone weather system with a maximum mean wind speed >=12 in the vicinity of the ground floor that may landed at a site.
3.2 Sensor
A device or device that can sense a specified component to be measured and convert it into a usable signal according to a certain law (mathematical function law)
Sensitive components and conversion components.
3.3 Ultrasonic anemometer
Measuring transducers that measure wind speed and direction using the difference in time or frequency at the receiving end (Doppler shift)
Or measuring instruments, can be vertical, horizontal and vertical three-dimensional wind speed and direction measurement.
3.4 Typhoon mobile observation platform
Bearing (installation) typhoon observation equipment, with strong maneuvering, wind performance observation platform.
3.5 Observation tower
A tower mast capable of installing meteorological instruments at multiple levels.
3.6 Observation point preset
Before the installation of observing instruments, conduct on-site survey and site selection of the typhoon areas to be observed and set observation points in advance.
4 observe the design requirements
4.1 Observation Elements
Wind speed, wind direction, pressure observation, and can choose temperature, humidity, precipitation and other elements of observation.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34309-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34309-2017
$145.00