GB/T 34287-2017Greenhouse gas—Methane measurement—Off-axis integrated cavity output spectroscopy method (English PDF)
温室气体 甲烷测量 离轴积分腔输出光谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34287-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 7, 2017
Implementation date
April 1, 2018
Scope
GB/T 34287-2017 is the English-translated version of 温室气体 甲烷测量 离轴积分腔输出光谱法.
GB/T 34287-2017 is the Chinese standard "Greenhouse gas—Methane measurement—Off-axis integrated cavity output spectroscopy method".
Its scope clause reads: This standard specifies the use of off-axis integrated output spectroscopy method to measure the concentration of greenhouse gases in the ambient atmosphere gas method overview, measurement conditions, Measurement preparation, measurement methods and standard calibration methods.
This standard applies to the measurement of greenhouse gas methane concentration. Its clauses include terms and definitions; method overview.
Found what you need?
Document preview — GB/T 34287-2017
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Terms and definitions
- 3 Method Overview
- 3.1 Methodology
- 3.2 Method Types
- 4 measurement conditions
- 4.1 The main technical indicators
- 4.2 key components
- 5 Measurement Preparation
- 5.1 Sample Preparation
- 5.2 Equipment Preparation
- 5.2.1 Linear Test
- 5.2.2 Repeatability test
- 5.2.3 Drift test
- 6 measurement methods
- 6.1 direct measurement method
- 6.2 standard gas standard measurement method
- 7 standard school method
1 Scope
This standard specifies the use of off-axis integrated output spectroscopy method to measure the concentration of greenhouse gases in the ambient atmosphere gas method overview, measurement conditions,
Measurement preparation, measurement methods and standard calibration methods.
This standard applies to the measurement of greenhouse gas methane concentration.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Standard gas
To clean the air as the next gas, the concentration of the target substance is known as a mixed gas.
Note. Rewrite QX/T 125-2011, Definition 10.2.
2.2 Working standard gas
The standard gas used for the quantitative measurement of the concentration of the target substance in the sample.
Note. Rewrite QX/T 125-2011, Definition 10.8.
2.3 Target standard gas
A calibration gas used as a regular and repeat measure for the inspection and evaluation of the operating conditions of a measuring system.
Note. Rewrite QX/T 125-2011, Definition 10.9.
2.4 Sample gas
Gas measured by the measurement system.
2.5 Direct measurement method
The method of measuring the concentration of the target substance in the sample gas directly by using an off-axis integrating cavity output spectrometer.
2.6 Standard gas standard measuring method
The off-axis integral cavity output spectrometer is used to alternately measure the concentration responses of the working standard gas, the target standard gas and the target substance in the air, and then according to
The working standard gas concentration of the target substance calculated target gas or air target substance concentration method.
3 Method Overview
3.1 method principle
According to the characteristic absorption spectrum of the target substance, the laser with the specific wavelength is deviated from the optical axis and injected into the high-precision resonant cavity filled with the sample gas,
Efficient reflection under the effect of continuous reflection, by measuring and comparing the intensity of incident light and transmitted light to get the sample gas in the target substance […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34287-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34287-2017
$145.00