GB/T 34243-2017Test method for pervaporation dehydration membranes (English PDF)
渗透气化透水膜性能测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34243-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 7, 2017
Implementation date
April 1, 2018
Scope
GB/T 34243-2017 is the English-translated version of 渗透气化透水膜性能测试方法.
GB/T 34243-2017 fixes the test method for the permeation flux and the separation factor of pervaporation dehydration membranes. Clause 1 applies it to performance testing of pervaporation flat membranes, pervaporation tubular membranes and vapour permeation tubular membranes used for the dehydration of organic solvents.
Clause 3 establishes the vocabulary of the test, defining pervaporation as separation achieved through the difference in the rates at which the components of a liquid mixture dissolve in and diffuse through the membrane, and vapour permeation as the same mechanism applied to the components of a vapour mixture, both taken from GB/T 20103-2006.
The same clause defines the pervaporation dehydration membrane as one through which water permeates preferentially, the flat membrane as a membrane in sheet form, the tubular membrane as a tube-shaped membrane with a diameter of 6 mm to 24 mm, the permeate as the part of the material that passes through the membrane, and the membrane surface flow velocity as the linear velocity, in metres per second, at which the liquid or vapour feed flows across the membrane surface.
Clause 2 cites GB/T 6682-2008 as a normative reference.
The standard falls under the National Technical Committee on Membrane Separation (SAC/TC 382) and was drafted with the participation of membrane engineering companies, the Chengdu Institute of Organic Chemistry of the Chinese Academy of Sciences, Tsinghua University and Nanjing University of Technology. It was issued on 7 September 2017 and has applied since 1 April 2018.
Found what you need?
Document preview — GB/T 34243-2017
National Standard of the People's Republic of China
- ICS
- 19.020
- Classification
- J 77
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the permeate gasification permeable membrane permeability flux and separation factor of the test method.
This standard applies to the permeability of organic solvent dehydration gasification flat membrane, permeate gasification tubular membrane and vapor permeation tube membrane performance test.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
Laboratory use specifications and test methods for analysis GB/T 6682-2008
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Pervaporation
The separation of the components is achieved by the difference in the rate of dissolution and diffusion of the liquid mixture components in the membrane. [GB/T 20103-2006, Definition 6.2.7]
3.2 Vapor penetration
The separation of the components is achieved by the difference in the rate of dissolution and diffusion of the components of the vapor mixture in the membrane. [GB/T 20103-2006, Definition 6.2.8]
3.3 Pervaporation vaporization membrane
Preferential permeation of water through the gasification membrane.
3.4 Flat membrane
Shape for the flat sheet or paper film. [GB/T 20103-2006, Definition 2.1.27]
3.5 Tubular membrane
The shape of the tube, a diameter of 6mm ~ 24mm film.
3.6 Permeate
Part of the material through the membrane.
3.7 Membrane flow
The linear velocity of the feedstock (liquid or vapor) flowing on the membrane surface. The unit is meters per second (m/s).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34243-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34243-2017
$235.00