Valid

GB/T 34241-2017Spiral wound composite polyamide reverse osmosis membrane element (English PDF)

卷式聚酰胺复合反渗透膜元件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34241-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 7, 2017

Implementation date

April 1, 2018

Scope

GB/T 34241-2017 is the English-translated version of 卷式聚酰胺复合反渗透膜元件.

GB/T 34241-2017 covers the spiral wound composite polyamide reverse osmosis membrane element, which the draft calls the roll polyamide composite reverse osmosis membrane element and shortens to reverse osmosis membrane element.

Clause 1 states that the standard specifies the classification and type, the requirements, the test methods, the inspection rules and the marking, packaging, transportation and storage of these elements.

The same clause says it applies to their production, research, use and management, and adds that other types of reverse osmosis membrane element may follow it as a reference.

Clause 2 cites GB/T 191, GB/T 2828.1, GB/T 6908 and GB/T 9174, a health administration document on the hygiene and safety evaluation of distribution equipment and protective materials for domestic drinking water (Wei Fa Jian Fa [2001] 161), and two further entries, one on the determination of chloride ion in industrial circulating cooling water and boiler water and one on membrane separation technology terminology, whose numbers the draft does not print.

Clause 3 states that the definitions of GB/T 20103-2006 apply and repeats the relevant ones for ease of use: the composite membrane, made from two different membrane materials with a dense surface-active layer that performs the separation and a porous layer that supports it; the reverse osmosis membrane, a semi-permeable membrane that separates solvent from solute by reverse osmosis; the polyamide composite reverse osmosis membrane, whose surface active layer is polyamide; and the feed water channel spacer, the polymer net with a network structure on the feed water side of a roll-type element that guides and disturbs the flow.

The draft stops at the end of that fourth entry, so the requirement, test method and inspection clauses announced in clause 1 are not shown. The standard is administered by the National Standardization Technical Committee on membrane separation (SAC/TC382).

The page declares no replaced edition; it was issued on September 7, 2017 and has applied since April 1, 2018.

Found what you need?

Document preview — GB/T 34241-2017

National Standard of the People's Republic of China

ICS
07.060
Classification
J 77

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions GB/T 20103-2006 defined and the following

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the roll polyamide composite reverse osmosis membrane elements (hereinafter referred to as reverse osmosis membrane element) classification and type, requirements, test side Law, inspection rules, marking, packaging, transportation and storage.

This standard applies to roll polyamide composite reverse osmosis membrane element production, research, use and management, and other types of reverse osmosis membrane element Pieces can refer to the implementation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

GB/T 2828.1 Sampling procedures for sampling inspection - Part 1: Batch inspection sampling plan retrieved by acceptance quality limit (AQL)

Determination of conductivity of boiler water and cooling water GB/T 6908

GB/T 9174 general cargo transport packaging general technical conditions

Determination of chloride ion in industrial circulating cooling water and boiler water GB/T

Membrane separation technology terminology

Domestic drinking water distribution equipment and protective materials health and safety evaluation (Wei Fa Jian Fa [2001] 161)

3 Terms and definitions

GB/T 20103-2006 defined and the following terms and definitions apply to this document. For ease of use, the following list is repeated GB/T 20103-2006 related terms and definitions.

3.1 Composite membrane

Two different membrane materials were used to make the surface-active layer (dense layer) with separation function and the porous layer functioning as support Of the film. [GB/T 20103-2006, Definition 2.1.21]

3.2 Reverse osmosis membrane

Semi-permeable membrane for the separation of solvents and solutes from reverse osmosis. [GB/T 20103-2006, Definition 4.1.1]

3.3 Polyamide composite reverse osmosis membrane

Composite reverse osmosis membrane with polyamide as its surface active layer.

3.4 Feed water channel spacer

Roll-type membrane element in the water side of the network has a network structure, from the role of diversion and disturbance of the polymer network.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 34241-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34241-2017

$235.00