GB/T 34125-2017General specification for outdoor cabinet with relaying protection and security automatic equipment of power system (English PDF)
电力系统继电保护及安全自动装置户外柜通用技术条件
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34125-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 34125-2017 is the English-translated version of 电力系统继电保护及安全自动装置户外柜通用技术条件.
GB/T 34125-2017 is the Chinese standard "General specification for outdoor cabinet with relaying protection and security automatic equipment of power system".
Its scope clause reads: This standard specifies the general technical requirements, test methods, inspection rules and standard of outdoor cabinet for power system relay protection and safety automatic device Log, packaging, transportation and storage requirements.
This standard applies to the power system used in the relay protection and safety automatic device outdoor cabinets and installation of intelligent terminals, merging unit control System cabinet (hereinafter referred to as outdoor cabinet).
Found what you need?
Document preview — GB/T 34125-2017
National Standard of the People's Republic of China
- ICS
- 29.240
- Classification
- K 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 basic requirements
- 5 Environmental Adaptability Requirements
- 6 Electrical Requirements
- 7 mechanical performance requirements
- 8 Safety Requirements
- 9 temperature control equipment
- 10 Test methods
- 11 Inspection rules
- 14 Quality Assurance
- Appendix A (informative) temperature control options
- References
1 Scope
This standard specifies the general technical requirements, test methods, inspection rules and standard of outdoor cabinet for power system relay protection and safety automatic device
Log, packaging, transportation and storage requirements.
This standard applies to the power system used in the relay protection and safety automatic device outdoor cabinets and installation of intelligent terminals, merging unit control
System cabinet (hereinafter referred to as outdoor cabinet).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature
GB/T 2423.17 Environmental testing for electric and electronic products Part 2. Test methods Test Ka. Salt spray
GB/T 2423.24 Environmental testing Part 2. Test methods Test Sa. Simulation of solar radiation on the ground and its test guidelines
Basic terms of electrotechnical terminology GB/T 2900.1-2008
GB/T 3181-2008 Paint color standard
GB/T 4208-2008 enclosure protection (IP code)
Electric and electronic products - Natural environmental conditions - Temperature and humidity GB/T 4797.1-2005
GB/T 4798.4 Environmental conditions for the application of electrical and electronic products Part 4. Stationary use of non-climate protection
GB/T 5095.2 Electromechanical components for electronic equipment - Basic test procedures and measurement methods - Part 2. General inspection, electrical continuity
Sex, contact resistance test, insulation test and voltage stress test
GB/T 5169.16-2008 Fire hazard testing for electric and electronic products Part 16. Test flame 50W Horizontal and vertical fire
Flame test method
GB/T 7261 protection and safety automatic device basic test methods
Test method for burning behavior of foam plastics - Horizontal combustion method
Electrotechnical equipment - Mechanical structures - Terminology GB/T 8582-2008
Classification of combustion properties of building materials and products
Tests for crosshatch of paints and varnishes - GB/T 9286-1998
Visual colorimetry of paints and varnishes - GB/T 9761-2008
Environmental conditions for electric and electronic products - Terminology GB/T 11804-2005
Environmental Noise Emission Standards for Industrial Enterprises
GB/T 13384 mechanical and electrical product packaging General technical conditions
GB/T 14598.26-2015 Measuring relays and protection equipment - Part 26. EMC requirements
Measuring relays and protection equipment - Part 27. Product safety requirements […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34125-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34125-2017
$405.00