GB/T 3410.1-2008Instrument for dam monitoring joint meter - Part 1: Unbonded elastic wire resistance joint meter (English PDF)
大坝监测仪器 测缝计 第1部分：差动电阻式测缝计
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3410.1-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 15, 2008
Implementation date
May 1, 2008
Scope
GB/T 3410.1-2008 is the English-translated version of 大坝监测仪器 测缝计 第1部分：差动电阻式测缝计.
GB/T 3410.1-2008 is the Chinese standard "Instrument for dam monitoring joint meter - Part 1: Unbonded elastic wire resistance joint meter".
Its scope clause reads: GB/T 3410 provisions of this part of the differential resistance joint meter product mix, specifications and main parameters, technical requirements, test side Method, inspection rules, marking and instructions for use, as well as packaging, transportation, storage and so on.
Differential resistance measurement This section applies to embedded monitoring structure displacement or expansion joints in the open in various geotechnical engineering degree (deformation) Joint meter. Its clauses include terms, definitions, symbols and units.
Found what you need?
Document preview — GB/T 3410.1-2008
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- P 10
- Replacing
- GB/T 3410-1994
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, definitions, symbols and units
- 4 product structure, the main parameters
- 5 Technical requirements
- 6 Test Method
- 7 inspection rules
- 8 Marking and instructions
- 9 packaging, transportation and storage
- Appendix A (normative) parameter differential resistance joint meter to measure the temperature of
1 Scope
GB/T 3410 provisions of this part of the differential resistance joint meter product mix, specifications and main parameters, technical requirements, test side
Method, inspection rules, marking and instructions for use, as well as packaging, transportation, storage and so on.
Differential resistance measurement This section applies to embedded monitoring structure displacement or expansion joints in the open in various geotechnical engineering degree (deformation)
Joint meter.
2 Normative references
The following documents contain provisions which, through reference to GB/T 3410 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 191 Packaging - Pictorial signs
GB/T 5080.7 Equipment reliability testing efficiency constant failure rate assumption under the MTBF of test plans
GB/T 6388 transport package shipping mark
GB 9969.1 Instructions General Industrial Products
GB/T 15406 geotechnical engineering instrument basic parameters and general technical conditions
GB/T 15464 instrumentation packaging technology
GB/T 50279 Standard for fundamental terms of geotechnical engineering
3 Terms, definitions, symbols and units
GB/T 50279 and established the following terms, definitions, symbols and units applicable to GB/T 3410 of this part.
3.1
Long-term measurement of structure displacement or degree of opening of the expansion joints (Deformation) sensors.
3.2
In a pair of differential changes in the wire joint meter measuring deformation as the sensing element.
3.3
Sensitive elements of the two differential change in wire resistance values R1 and R2 ratio.
Z = R1R2
3.4
Differential resistance joint meter resistance ratio measured value when compared with the resistance change amount corresponding to the amount of input is zero.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 3410.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 3410.1-2008 | Instrument for dam monitoring joint meter - Part 1: Unbonded elastic wire resistance joint meter | current edition | Current |
| GB/T 3410-1994 | Instrument for dam monitoring joint meter - Part 1: Unbonded elastic wire resistance joint meter | previous edition | Superseded |
This page sells the current edition, GB/T 3410.1-2008. Earlier editions are listed for reference only.
How to Download GB/T 3410.1-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3410.2-2008 — Instrument for dam monitoring - Joint meter - Part 2: Vibrating wire joint meter
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 3410.1-2008
$175.00