Valid

GB/T 33913.2-2017Method for chemical analysis of tris(triphenylphosphine) rhodium(I) chloride - Part 2: The determination of lead, iron, copper, palladium, platinum, aluminium, nickel, magnesium, zinc content - Inductively coupled plasma atomic emission spectrometry (English PDF)

三苯基膦氯化铑化学分析方法 第2部分:铅、铁、铜、钯、铂、铝、镍、镁、锌量的测定 电感耦合等离子体原子发射光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33913.2-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 12, 2017

Implementation date

February 1, 2018

Scope

GB/T 33913.2-2017 is the English-translated version of 三苯基膦氯化铑化学分析方法 第2部分:铅、铁、铜、钯、铂、铝、镍、镁、锌量的测定 电感耦合等离子体原子发射光谱法.

GB/T 33913.2-2017 is the Chinese standard "Method for chemical analysis of tris(triphenylphosphine) rhodium(I) chloride - Part 2: The determination of lead, iron, copper, palladium, platinum, aluminium, nickel, magnesium, zinc content - Inductively coupled plasma atomic emission spectrometry".

Its scope clause reads: GB/T 33913 This part specifies the determination of lead, iron, copper, palladium, platinum, aluminum, nickel, magnesium and zinc in triphenylphosphine rhodium chloride.

This part is applicable to the determination of lead, iron, copper, palladium, platinum, aluminum, nickel, magnesium and zinc in triphenylphosphine rhodium chloride and triphenylphosphine carbonyl chloride, Measuring range. 0.001% to 0.1%. Its clauses include method summary; reagents and materials.

Found what you need?

Document preview — GB/T 33913.2-2017

National Standard of the People's Republic of China

ICS
77.120.99
Classification
H 68

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 method summary
  • 3 reagents and materials

1 Scope

GB/T 33913 This part specifies the determination of lead, iron, copper, palladium, platinum, aluminum, nickel, magnesium and zinc in triphenylphosphine rhodium chloride.

This part is applicable to the determination of lead, iron, copper, palladium, platinum, aluminum, nickel, magnesium and zinc in triphenylphosphine rhodium chloride and triphenylphosphine carbonyl chloride,

Measuring range. 0.001% to 0.1%.

2 method summary

The samples were decomposed by nitric acid-perchloric acid, mixed with hydrochloric acid and nitric acid, and inductively coupled plasma atomic emission spectra were used.

Element at the wavelength corresponding to the measurement and calculate the mass fraction.

3 reagents and materials

Unless otherwise stated, water is used as a reagent of grade 1 and grade 1 or pure water. The vessels used for the tests are used

Dilute the water solution (3.4) fully soaked in water after thorough cleaning.

3.1

Hydrochloric acid (rho = 1.19 g/mL).

3.2

nitric acid (rho = 1.42 g/mL).

3.3

Perchloric acid (rho = 1.76 g/mL).

3.4 mixed acid

three units of hydrochloric acid (3.1) with a unit volume of nitric acid (3.2) mixed with the current distribution.

3.5

Hydrochloric acid (1 19).

3.6

Hydrochloric acid (19).

3.8 lead standard storage solution

Weigh 0.1000g metal lead (mass fraction >= 99.99%) set.200mL beaker, add 10mL nitric acid (3.7), dissolve completely at low temperature, cool to room temperature, move in 100 mL volumetric flask with hydrochloric acid (3.6) and dilute to the mark. Mix well. This solution

Liquid 1mL containing 1.000mg lead.

3.9 iron standard storage solution

Weigh 0.1000g metal iron (mass fraction >= 99.99%), placed in.200mL beaker, add 5mL salt

Acid (3.1), cover the surface of the dish, low temperature heating to dissolve completely. Cooled to room temperature, transferred to 100 mL volumetric flask with hydrochloric acid (3.6) and diluted to

Scale. Mix well. 1mL of this solution contains 1.000mg of iron.

3.10 copper standard storage solution

accurately weighed 0.1000g metal copper (mass fraction >= 99.99%), placed in.200mL beaker. Join

6mL nitric acid (3.7), cover the surface of the dish, heating dissolved completely. Cooled to room temperature, transferred to 100 mL volumetric flask with hydrochloric acid (3.6) and diluted

To the scale. Mix well. 1 mL of this solution contains 1.000 mg of copper.

3.11 palladium standard storage solution

Weigh 0.1000g of metal palladium (mass fraction >= 99.99%) set.200mL beaker, add 3mL hydrochloric acid […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 33913.2-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33913.2-2017

$145.00