Valid

GB/T 33913.1-2017Method for chemical analysis of tris(triphenylphosphine) rhodium(I) chloride - Part 1: The determination of rhodium content - Inductively coupled plasma atomic emission spectrometry (English PDF)

三苯基膦氯化铑化学分析方法 第1部分:铑量的测定 电感耦合等离子体原子发射光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33913.1-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 12, 2017

Implementation date

February 1, 2018

Scope

GB/T 33913.1-2017 is the English-translated version of 三苯基膦氯化铑化学分析方法 第1部分:铑量的测定 电感耦合等离子体原子发射光谱法.

GB/T 33913.1-2017 is the Chinese standard "Method for chemical analysis of tris(triphenylphosphine) rhodium(I) chloride - Part 1: The determination of rhodium content - Inductively coupled plasma atomic emission spectrometry".

Its scope clause reads: This part of GB/T 33913 specifies the method for the determination of the amount of rhodium in triphenylphosphine rhodium chloride. This part is applicable to the determination of the amount of rhodium in triphenylphosphine rhodium chloride.

Measuring range. 0.5% ~ 12%. Its clauses include principle of the method; reagents and materials.

Found what you need?

Document preview — GB/T 33913.1-2017

National Standard of the People's Republic of China

ICS
77.120.99
Classification
H 68

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 principle of the method
  • 3 reagents and materials
  • 3.4 Hydrogen peroxide (30%).

1 Scope

This part of GB/T 33913 specifies the method for the determination of the amount of rhodium in triphenylphosphine rhodium chloride.

This part is applicable to the determination of the amount of rhodium in triphenylphosphine rhodium chloride. Measuring range. 0.5% ~ 12%.

2 principle of the method

The sample is nitric acid, perchloric acid heating on the hot plate smoke decomposition decomposition of organic matter, and then use the mixed acid rhodium can be converted into rhodium

Liquid, indium as the internal standard, inductively coupled plasma emission spectrometer to determine the calculated rhodium mass fraction.

3 reagents and materials

Unless otherwise stated, only the reagents identified as analytical reagents and distilled or deionized water or comparable purity were used in the analysis.

3.1

Hydrochloric acid (rho = 1.19 g/mL).

3.2

nitric acid (rho = 1.42 g/mL).

3.3

Perchloric acid (rho = 1.76 g/mL).

3.4

Hydrogen peroxide (30%).

3.5 mixed acid

three units of hydrochloric acid (3.1) with a unit volume of nitric acid (3.2) mixed with the current distribution.

3.7

Hydrochloric acid (19).

3.8 indium internal standard solution

Weigh 0.1000g metal indium (mass fraction >= 99.9%) set.200mL beaker, add 10mL nitric acid (3.6), dissolve completely at low temperature, cool to room temperature, water into the 100 mL volumetric flask and dilute to the mark. Mix well. This solution 1mL

Containing 1.000 mg of indium.

3.9 rhodium standard storage solution

Weigh 0.1000g rhodium powder (mass fraction >= 99.99%), placed in 50mL special hard glass tube, adding

8 mL of hydrochloric acid (3.1), 2 mL of hydrogen peroxide (3.4), the glass tube was sealed on a gasoline torch flame and the glass tube was placed in a 300 ° C furnace

Complete solution. Cooling, open tube. The tube test solution with hydrochloric acid (3.7) into the 100mL volumetric flask and diluted to the mark, mix. This solution

1 mL containing 1.000 mg of rhodium.

3.10 rhodium standard solution

take six 100mL volumetric flask, respectively, the corresponding amount of rhodium standard storage solution (3.9), each add 1.00mL

Indium internal standard solution (3.8), 10mL hydrochloric acid (3.1), diluted with water volume. Mix well. The rhodium content was 5.00 µg/mL, 10.00 µg/mL,

3.11

argon (volume fraction >=99.99%).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 33913.1-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33913.1-2017

$145.00