Valid

GB/T 33869-2017Comparison method for absolute pyrheliometer (English PDF)

绝对直接辐射表比对方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33869-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 12, 2017

Implementation date

February 1, 2018

Scope

GB/T 33869-2017 is the English-translated version of 绝对直接辐射表比对方法.

GB/T 33869-2017 sets out how absolute pyrheliometers are compared with one another: the conditions, the method, the handling of the data, the results and how often the comparison is repeated.

The site must be open with nothing above the sensor, the sky clear with a direct irradiance of at least 700 W·m-2, the work between 10:00 and 14:00, the air temperature between 10 °C and 30 °C, the relative humidity not above 80% and the wind below 3 m/s.

The reference group is at least three cavity pyrheliometers of different types traceable to the World Radiometric Reference, with an uncertainty no greater than 0.3%; the digital instrument resolves to 1 µV and the sun tracker to 0.25°.

It defines the cavity and the compensated Ångström pyrheliometer. It was issued on 12 July 2017 and has applied since 1 February 2018.

Found what you need?

Document preview — GB/T 33869-2017

National Standard of the People's Republic of China

ICS
07.060
Classification
A 47

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 terms and definitions
  • 3 match condition
  • 4 Matching Method
  • 5 data processing
  • 6 Matching Results
  • 7 Matching time interval
  • Reference

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the relative direct radiation table alignment conditions, alignment methods, data processing, alignment results and alignment time interval.

This standard applies to the comparison of absolute direct radiation tables.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Cavity type absolute direct radiation table

A direct irradiance measuring instrument with a cavity receiver and self-calibrating using an electrical alternative.

Note: divided into active and passive two.

2.2 Compensated absolute direct radiation table

Aischro direct radiation table Ångström pyrheliometer A receiver with two parallel inductive slices and a self-calibrating direct irradiance measuring instrument using an electrical alternative.

2.3 Comparison

Under the specified conditions, the same accuracy level or the specified uncertainty range of the same kind of measurement equipment to reproduce the value of the comparison between process.

3 Match the conditions

3.1 Environmental conditions

3.1.1 around the open, the instrument sensor surface above no obstacles.

3.1.2 sunny sky, the sun direct irradiance of not less than 700W · m-2, should be in place between 10 pm and 14 o'clock.

3.1.3 air temperature in the range of 10 °C ~ 30 °C, the relative humidity should not be greater than 80%, the wind speed should be less than 3m/s.

3.2 Standard and ancillary equipment

Technical indicators should meet the following requirements.

a) Solar radiation measurement standard group. at least three different types of cavities that are traceable to the World Radiation Benchmark (WRR)

Absolute direct radiation table, the uncertainty should not be greater than 0.3%.

b) digital instrument. 0.05, the resolution should not be greater than 1µV.

c) sun tracker. tracking error should not be greater than 0.25 °.

d) environmental measuring instruments. technical indicators in Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 33869-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33869-2017

$145.00