Valid

GB/T 33810-2017Testing method of bulk density for pesticides (English PDF)

农药堆密度测定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33810-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 31, 2017

Implementation date

December 1, 2017

Scope

GB/T 33810-2017 is the English-translated version of 农药堆密度测定方法.

GB/T 33810-2017 is the Chinese national method for measuring how densely a solid pesticide packs. It covers the pour density and the tap density reached after the sample has been settled, and it applies to solid preparations such as granules and water dispersible granules.

A weighed sample is slid off wax paper into a stoppered 250 mL graduated cylinder, filled to about 90 per cent of the marked volume, and its volume is read; the cylinder is then raised 25 mm and dropped onto a rubber pad fifty times before the volume is read again.

The standard also fixes the apparatus: the cylinder readable to 2 mL, a rubber pad of 35 to 50 IRHD, a balance accurate to 0.1 g and a drop box. It was issued on 31 May 2017 and has applied since 1 December 2017.

Found what you need?

Document preview — GB/T 33810-2017

National Standard of the People's Republic of China

ICS
65.100
Classification
G 23

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Terms and definitions
  • 3 Test method

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the method for determining the bulk density and real density of pesticides.

This standard is applicable to the bulk density and solid density of solid preparations such as granules and water dispersible granules.

2 Terms and definitions

The following terms and definitions apply to this document.

2.1 Bulk density

The bulk density of the solid matter, including bulk density and true density.

2.2 Pour density

A certain amount of solid material without any sinking power, loose placed in the standard size of the container density.

2.3 Real density

The density of the solid matter placed in the standard gauge container after vibration or tapping under standard conditions.

3 Test method

3.1 Method Summary

First, a solid sample of known mass is placed in a standard gauge graduated cylinder to measure the bulk density thereof; and then the cylinder is raised 25mm distance, vertical drop to a rubber base pad, so repeat 50 times, measuring the volume of real density.

3.2 Instruments

3.2.1 with plug cylinder. range 250mL, the accuracy of at least ± 2mL, from 25mL ~ 250mL scale value of the minimum scale value of 2mL, The distance from 0 to 250 mL is 22 cm to 24 cm.

3.2.2 rubber base pad. with 35 to 50 international rubber hardness (IRHD), or other similar hardness of the material, such as chloroprene rubber sheet.

3.2.3 Wax paper.

3.2.4 Stopwatch.

3.2.5 Balance. accuracy of at least 0.1g.

3.2.6 drop box. should be placed in a hard and solid test bench.

3.3 Determination steps

Place the sample on wax paper, form the wax paper into a chute, slowly and slowly slide the sample into a known mass at about 45 ° bevel The amount of the cylinder, up to about 90% of the cylinder marked volume, gently flatten the sample surface, do not shake the cylinder, measuring its volume (accurate to 2 mL) and then weighed the mass of the sample (accurate to 0.1 g). Cover the rubber stopper and carefully drop the graduated cylinder into the solid density measuring device Inside the box (see Figure 1), gently grasp the upper part of the cylinder, increase the speed of 25mm (in the process of increasing the speed of about 10 degrees to help the sample formation level

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 33810-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33810-2017

$70.00