GB/T 33753-2017General specification for rotary automatic filling-capping machine for high viscosity fluid (English PDF)

1 Scope

This standard specifies the terms and definitions, type, type, basic parameters and working conditions of rotary automatic viscous fluid filling and capping machine.

Technical requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements.

This standard applies to the use of bottle-shaped containers (hereinafter referred to as "bottles") on the dynamic viscosity of 0.03Pa · s ~ 10Pa · s (30cp ~ 10000cp) (Hereinafter referred to as "filling liquid") for filling, capping the rotary automatic viscous fluid

Filling capping machine (hereinafter referred to as "filling and sealing machine").

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 191 packaging and storage icon

GB 2894 Safety signs and guidelines for their use

GB/T 4208-2008 enclosure protection class (IP code)

Standard for Hygienic Standard for Rubber Products for Food

Mechanical electrical safety machinery - Electrical equipment - Part 1. General technical requirements GB 5226.1-2008

GB/T 7311 Packaging machinery classification and model preparation method

GB/T 7932 General technical requirements for pneumatic systems

General rules for the use of industrial products GB/T 9969

Compressed air - Part 1. Degree of purification of pollutants GB/T 13277.1-2008

GB/T 13306 signs

General specification for packaging of electromechanical products GB/T 13384

GB/T 14253 General technical requirements for light industrial machinery

GB 15179 Food Machinery Grease

GB/T 15706 General principles of mechanical safety design Risk assessment and risk reduction

Safety and Health of Food Machinery

GB/T 16855.1 Mechanical safety control systems - Safety components - Part 1. Design general rules

Safety requirements for mechanical safety mechanical design GB/T 19891

JB/T 7232 Packaging Mechanical noise - Simple method for the determination of sound power levels

JB7233 packaging machinery safety requirements

3 terms and definitions

The following terms and definitions apply to this document.