Valid

GB/T 33741-2017Mobile payment—Technical requirements for contactless reader terminal based on 2.45GHz range controlled communication technology (English PDF)

手机支付 基于2.45GHz RCC(限域通信)技术的非接触式读写器终端技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33741-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 12, 2017

Implementation date

December 1, 2017

Scope

GB/T 33741-2017 is the English-translated version of 手机支付 基于2.45GHz RCC(限域通信)技术的非接触式读写器终端技术要求.

GB/T 33741-2017 sets the technical requirements for the contactless reader terminals used in mobile payment over 2.45 GHz RCC, range controlled communication.

For the reader it covers the technology architecture, the working states and working modes, the identification of the card reading area, the spacing required between cards read in succession, the card reading success rate, the reading distance, MTC collision detection, the electrical characteristics, the communication interface and the software.

For the POS terminal it covers the screen display, the keyboard and the PIN pad, transaction storage, communication ports, the printer, power and battery, reliability, security, electromagnetic compatibility and environmental adaptability to high and low temperature, damp heat and mechanical conditions.

It cites GB/T 33736, GB/T 2312-1980, GB 4943.1-2011, GB/T 9254-2008, GB/T 17618-2015 and YD/T 1539-2006. Issued on 12 May 2017, it has applied since 1 December 2017.

Found what you need?

Document preview — GB/T 33741-2017

National Standard of the People's Republic of China

ICS
33.050.99
Classification
M 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 normative reference document
  • 3 terms and definitions, abbreviations
  • 3.1 Terms and definitions
  • 3.2 Abbreviations
  • 4 reader technical requirements
  • 4.1 Overview
  • 4.2 General technical requirements
  • 4.2.1 reader technology architecture
  • 4.2.2 reader working state Figure
  • 4.2.3 working mode
  • 4.2.4 reader card area identification
  • 4.2.5 Several times of continuous card spacing requirements
  • 4.2.6 Card reading success rate
  • 4.2.7 Reading distance
  • 4.2.8 MTC conflict detection
  • 4.3 basic technical characteristics of the reader
  • 4.3.1 Electrical characteristics
  • 4.3.2 Communication Interface Features
  • 4.3.3 Software requirements
  • 5 POS terminal technical requirements
  • 5.1 Screen display (optional)
  • 5.2 Keyboard (optional)
  • 5.3 password keyboard (optional)
  • 5.4 non-contact reader
  • 5.5 Transaction storage (optional)
  • 5.6 Other communication ports other than contact communication (optional)
  • 5.7 Printer (optional)
  • 5.8 Power and battery (optional)
  • 5.9 Reliability
  • 5.10 security
  • 5.11 Electromagnetic compatibility of the whole machine
  • 5.12 Environmental Adaptability
  • 5.12.1 Overview
  • 5.12.2 high and low temperature, constant hot and humid
  • 5.12.3 Mechanical environment adaptability

Foreword

This standard is based on 2.45GHzRCC (limited field communication) technology, and based on 13.56MHz and 2.45GHz dual-band technology mobile phone Pay one of the series of standards. The series of standards is expected to include.

--- mobile phone payment based on 2.45GHzRCC (limited field communication) technology of non-contact RF interface technology requirements;

--- mobile phone payment based on 2.45GHzRCC (limited field communication) technology, smart card technology requirements;

--- mobile phone payment based on 2.45GHzRCC (limited field communication) technology of non-contact reader terminal technical requirements;

--- 13.56MHz and 2.45GHz dual-band technology based on non-contact reader RF interface technology requirements;

--- mobile phone payment based on 2.45GHzRCC (limited field communication) technology, non-contact RF interface test method;

--- mobile phone payment based on 2.45GHzRCC (limited field communication) technology, smart card test method;

--- Mobile payment based on 2.45GHzRCC (limited field communication) technology of non-contact reader terminal test method;

Realization of RF Interface Test Method for Contactless Readers Based on 13.56MHz and 2.45GHz Dual Frequency Technology.

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

Introduction

The issuer of this document draws attention to the fact that the statement may conform to this document and may involve the requirements of Chapter 4, "Interrogator Technical Requirements" Surgical architecture and distance control methods related to the use of patents.

The issuer of this document has no position on the authenticity, validity and scope of the patent.

The holder of the document has assured the issuing authority of this document that he is willing to cooperate with any applicant under reasonable and non-discriminatory terms and conditions, Negotiate on patent licensing. The statement of the above-mentioned patent holder has been filed with the issuing authority of this document. The relevant information can be passed by Under the contact access.

1 Scope

This standard specifies the mobile phone to pay based on 2.45GHzRCC (limited field communication) technology of non-contact reader terminal technical requirements, package Including non-contact reader technical requirements, terminal hardware requirements and so on.

This standard applies to non-contact reader/writer devices based on 2.45 GHz RCC (limited field communication) technology.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 33736 mobile payment based on 2.45GHzRCC (limited field communication) technology of non-contact RF interface technical requirements

GB/T 2312-1980 Basic set of Chinese character encoding character sets for information exchange

GB 4943.1-2011 Information technology - Equipment safety - Part 1: Generic requirements

GB/T 9254-2008 Information technology equipment - Radio disturbance limits and measurement methods

GB/T 17618-2015 Information technology equipment - Immunity limits and methods of measurement

YD/T 1539-2006 Technical requirements and test methods for reliability of mobile communication handhelds

Technical requirements for micropower (short distance) radio equipment [2005] No. 423

3 Terms and definitions, abbreviations

3.1 Terms and definitions

The following terms and definitions apply to this document.

3.1.1 Range communication

Communication distance range controllable wireless close range communication technology.

3.1.2 2.45GHz smart card

Based on 2.45 GHz RCC (limited field communication) technology, smart cards, including RF- (U) SIM card, RF-MiniSIM card, RF-NanoSIM card.

3.1.3 PSAM card

Payment system security control module for mobile payment of offline transaction electronic wallet security control.

3.1.4 Mobile payment terminal

Support for mobile terminals based on the 2.45GHz smart card for payment purposes.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 33741-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33741-2017

$185.00