GB/T 3373-2008Tractors and machinery for agriculture and forestry - Rims (English PDF)
农林拖拉机和机械 轮辋
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3373-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 3, 2008
Implementation date
July 1, 2008
Scope
GB/T 3373-2008 is the English-translated version of 农林拖拉机和机械 轮辋.
GB/T 3373-2008 is the Chinese standard "Tractors and machinery for agriculture and forestry - Rims". Its scope clause reads: This standard specifies the agricultural and forestry tractors and machinery rim terminology, symbols, signs, technical requirements, inspection rules and signs, packaging, transportation And storage.
This standard applies to agricultural and forestry tractors and machinery equipped with a pneumatic tire rims. Its clauses include terms, code, flag.
Found what you need?
Document preview — GB/T 3373-2008
National Standard of the People's Republic of China
- ICS
- 65.060.10
- Classification
- T 64
- Replacing
- GB 3373-1982
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the agricultural and forestry tractors and machinery rim terminology, symbols, signs, technical requirements, inspection rules and signs, packaging, transportation
And storage.
This standard applies to agricultural and forestry tractors and machinery equipped with a pneumatic tire rims.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
Size GB/T 708-2006 cold rolled steel sheet and strip, shape, weight and tolerance
GB/T 710-1991 quality carbon structural steel sheets and strips
GB/T 2933-1995 pneumatic tire and wheel rim terminology, specifications and code flags
GB/T 3372-2000 tractors, agricultural and forestry machinery rim series
GB/T 5213-2001 for deep drawing cold rolled steel sheet and strip
GB/T 9769-2005 rim contour detection
JB/T 5673-1991 agricultural and forestry tractors and machinery paint general technical conditions
3 Terms, code, flag
GB/T 2933-1995 established terminology, symbols, signs apply to this standard.
4. Technical Requirements 4.1 agricultural and forestry tractors and machinery equipped with a pneumatic tire rims should meet the requirements of this standard, and approved in accordance with prescribed procedures and product design
Technical documentation and manufacturing.
4.2
cold rolled sheet metal rims recommended GB/T 5213-2001 specified number 08A1 HF level, may also be GB/T 710-1991
Specified in 08 and No. 10 S-class, and in line with the steel sheet GB/T 708-2006 specified in B-level precision.
4.3
rim type size should be consistent with the provisions of GB/T 3372, the detection method should be in accordance with the provisions of GB/T 9769's.
4.3.1 rim diameter
4.3.1.1
ball by measuring the diameter of the rim u00d816 ball tape measure, the nominal rim diameter, the diameter of the calibration ball tape mandrel and a maximum diameter of the ball
According to the provisions of GB/T 3372, the detection method according to GB T 9769 and the provisions of the mandrel with a foot maximum circumference/Fig.
4.3.1.2
rim 2.50C and 3.00D should measure the diameter of the ball u00d810 ball tape measure, in accordance with the requirements specified in Table 1, see Methods
GB/T 3372 and GB T 9769 and the provisions/Fig.
4.3.1.3
R, S, T, V type and other flat rim calibrated diameter equal to the nominal diameter D DR, equal to the circumference piD, perimeter tolerance
± 1.2mm, using special flat-foot measuring tape detection method according to GB/T 9769 regulations.
Face runout 4.3.2 rim and spokes assembly bead seat and rim runout 4.3.2.1 When the detection cartridge rim and spokes bead seat runout and face runout of the rim to the center of the spoke holes or fastening holes fixed
Heart, detecting dial indicator or special tools.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 3373
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 3373-2008 | Tractors and machinery for agriculture and forestry - Rims | current edition | Current |
| GB 3373-1982 | Tractors and machinery for agriculture and forestry - Rims | previous edition | Superseded |
This page sells the current edition, GB/T 3373-2008. Earlier editions are listed for reference only.
How to Download GB/T 3373-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 3373-2008
$85.00