GB/T 33693-2017Test method for ultrasonic anemometer (English PDF)
超声波测风仪测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33693-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 12, 2017
Implementation date
December 1, 2017
Scope
GB/T 33693-2017 is the English-translated version of 超声波测风仪测试方法.
GB/T 33693-2017 is the laboratory test method for two-dimensional ultrasonic anemometers. It defines the instrument and the blockage ratio of the wind tunnel test section, then fixes the test conditions: 15 °C to 30 °C, relative humidity not above 85 % and atmospheric pressure from 500 hPa to 1 060 hPa.
It lists the standard and ancillary equipment, among them a Pitot static pressure tube with a coefficient of 0.999 to 1.002, a digital micromanometer covering 0 Pa to 2 500 Pa, a universal angle gauge covering 0° to 360°, a wind tunnel measuring at least 30 m/s with a blockage ratio no greater than 0.05, and a thermometer for 0 °C to 50 °C. Its normative Annex A gives the standard wind speed calculation. It was issued on 12 May 2017 and has applied since 1 December 2017.
Found what you need?
Document preview — GB/T 33693-2017
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 terms and definitions
- 3 Test conditions
- 4 Test Method
- Appendix A (normative) Standard wind speed calculation method
- Reference
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies a two-dimensional ultrasonic wind measuring instrument laboratory test method.
This standard is applicable to the testing of two-dimensional ultrasonic wind measuring instrument.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Ultrasonic wind measuring instrument
According to the ultrasonic velocity in the air propagation rate changes with the wind speed changes made by the principle of measuring instruments. [QX/T 8-2002, definition 5.4.46]
2.2 Blocking than blockage ratio
Wind tunnel test section of the instrument (including the installation bracket, anemometer starter lever and other control pieces) wind area and test section uniform area cross-sectional area Ratio. [JJG431-2014, definition 3.3]
3 Test conditions
3.1 Laboratory environment
Temperature. 15 °C to 30 °C; Relative humidity. not more than 85%; Atmospheric pressure. 500hPa ~ 1060hPa.
3.2 Standard equipment and ancillary equipment
Standard instruments and ancillary equipment, the main technical indicators in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33693-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33693-2017
$125.00