GB/T 33680-2017Grades of rainstorm disaster (English PDF)
暴雨灾害等级
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33680-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 12, 2017
Implementation date
December 1, 2017
Scope
GB/T 33680-2017 is the English-translated version of 暴雨灾害等级.
GB/T 33680-2017 grades rainstorm disasters and gives the indicators and the calculation methods used to assess what a rainstorm has done. It defines daily precipitation as the rain accumulated over the 24 hours ending at 20.00, a rainy day as one with 0.1 mm or more, and a rainstorm as precipitation of 50 mm or more in 24 h.
It also defines a rainstorm disaster, the affected crop area and the number of deaths caused by the rain. The grades bring these records and the direct economic loss together with meteorological indicators of rainfall intensity, duration and extent.
It is used to monitor, assess and study regional rainstorm disasters, and can be referred to in civil, agricultural, water and environmental work. It was issued on 12 May 2017 and has applied since 1 December 2017.
Found what you need?
Document preview — GB/T 33680-2017
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Terms and definitions
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
Introduction
Rainstorm is one of the major meteorological disasters in China. The impact of heavy rain on human society is usually manifested in economic losses, personnel Casualties, damage to crops, and water conservancy, power supply, communications and other infrastructure damage to varying degrees, and several other aspects.
This standard establishes an objective rainstorm disaster assessment standard, which is essential for disaster prevention and mitigation arrangements and post-disaster relief is also essential Evaluation of the important basis for disaster reduction.
This standard refers to the domestic classification of various types of disaster methods, and according to a large number of storm disaster disaster data, select the crop affected areas Plot, direct economic losses, dead population and other projects with specific disaster records, combined with precipitation intensity, precipitation duration, heavy rainfall range and other violence Rain disaster meteorological factors indicators, comprehensive division of the level of heavy rain disaster, quantitative assessment of the impact of heavy rain on the impact of society.
1 Scope
This standard specifies the indicators, grades and calculation methods for assessing the effects of rainstorms.
This standard applies to the monitoring, assessment and research of regional storm disasters, as well as civil, agricultural, water, environmental and other Socio-economic reference.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Daily precipitation
20 days before the day to 20.00 the cumulative precipitation.
Note: The unit is in millimeters (mm).
2.2 Precipitation day
Observed days with a daily precipitation greater than or equal to 0.1 mm.
Note: The unit is day (d).
2.3 Continuous precipitation days
The number of days of continuous precipitation.
Note: The unit is day (d).
2.4 Rainstorm
24h rainfall is greater than or equal to 50mm of precipitation.
Note: from the GB/T 28592-2012 Chapter 4.
2.5 Rainstorm disaster
Heavy rains have led to the flooding of flooded fields and urban and rural areas, causing damage to agriculture or other property and casualties.
2.6 Crop affected area
Due to heavy rain caused by crop production than the annual reduction of one percent and above the crop acreage.
Note 1: Unit is ha (hm²).
Note 2: rewrite GB/T 24438.1-2009, definition 3.10.
2.7 Death
The number of deaths caused by heavy rain.
Note 1: Unit is human.
Note 2: rewrite GB/T 24438.1-2009, definition 3.2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33680-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33680-2017
$85.00