GB/T 33403-2016Determination of self-levelling properties of adhesive (English PDF)
胶粘剂自流平性能的试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33403-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2016
Implementation date
July 1, 2017
Scope
GB/T 33403-2016 is the English-translated version of 胶粘剂自流平性能的试验方法.
GB/T 33403-2016 is the Chinese standard "Determination of self-levelling properties of adhesive". Its scope clause reads: This standard specifies the test method for the determination of self-leveling properties of adhesives.
This standard applies to the determination of self-leveling properties of adhesives. Its clauses include normative reference documents; terms and definitions; equipment and materials.
Found what you need?
Document preview — GB/T 33403-2016
National Standard of the People's Republic of China
- ICS
- 83.180
- Classification
- G 38
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 4 equipment and materials
1 Scope
This standard specifies the test method for the determination of self-leveling properties of adhesives.
This standard applies to the determination of self-leveling properties of adhesives.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2943 Adhesive Terminology
3 terms and definitions
GB/T 2943 and the following terms and definitions apply to this document.
3.1 Self-leveling
Without any external pressure conditions, the adhesive at the specified temperature, after a specified time after the stability of the plastic surface.
4 equipment and materials
4.1
250mL capacity of the polyethylene mixer.
4.2 Horizontal molds
The mold consists of a bottom-level, closed-end recess, the inner dimensions of the groove. width (20 ± 1) mm, depth (25
± 1) mm, length (300 ± 1) mm, the groove material should be 1mm ~ 2mm thick aluminum, steel or plastic. see picture 1.
The unit is in millimeters
Figure 1 Horizontal mold
4.3 inclined mold
the mold from the bottom of the groove and the horizontal direction (2.5 ± 0.1)% tilt, the bottom of the horizontal ends of the closed groove, concave
The length of the groove is width (20 ± 1) mm, depth (25 ± 1) mm, length (300 ± 1) mm, groove material should be 1mm ~ 2mm thick
Of aluminum, steel or plastic. See Figure 2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 33403-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 33403-2016
$85.00