GB/T 33399-2016Optical functional films - Polyethylene terephthalate(PET) film - Determination of thickness (English PDF)
光学功能薄膜 聚对苯二甲酸乙二醇酯(PET)薄膜 厚度测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33399-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2016
Implementation date
July 1, 2017
Scope
GB/T 33399-2016 is the English-translated version of 光学功能薄膜 聚对苯二甲酸乙二醇酯(PET)薄膜 厚度测定方法.
GB/T 33399-2016 is the Chinese standard "Optical functional films - Polyethylene terephthalate(PET) film - Determination of thickness". Its scope clause reads: This standard specifies the optical function of polyethylene terephthalate (PET) film thickness determination method.
This standard is applicable to the determination of the thickness of polyethylene terephthalate (PET) films with optical function by mechanical measurement. Its clauses include normative reference documents; instruments; sample requirements.
Found what you need?
Document preview — GB/T 33399-2016
National Standard of the People's Republic of China
- ICS
- 71.080.99
- Classification
- G 15
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 instruments
- 4 sample requirements
1 Scope
This standard specifies the optical function of polyethylene terephthalate (PET) film thickness determination method.
This standard is applicable to the determination of the thickness of polyethylene terephthalate (PET) films with optical function by mechanical measurement.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2918 Standard conditions for the regulation and testing of plastic specimens
3 instruments
3.1 Accuracy requirements
Mechanical thickness measuring instrument accuracy requirements are as follows.
- 100µm (including 100µm) accuracy of 1µm;
--- 100µm ~ 250µm (including 250µm) accuracy of 2µm;
--- More than 250µm accuracy of 3µm.
3.2 Measurement surface requirements
3.2.1 General requirements
The measuring instrument shall have a lower measuring surface with a flat surface and a measuring surface with a plane or convex surface. All measuring surfaces shall be
Light.
3.2.2
The upper and lower measuring surfaces are flat/flat
Each measuring surface diameter should be between 2.5mm ~ 10mm, two plane non-parallelism is less than 3µm. The measuring surface should be adjustable to full
Above the above requirements. The load applied to the sample should be between 1.0N and 2.0N.
3.2.3
The upper and lower measuring surfaces are convex/flat
The radius of curvature of the measurement surface should be between 15mm ~ 50mm, the diameter of the measurement surface should be not less than 5mm, the measurement of the face of the sample
Of the load should be between 0.5N ~ 1.0N.
4 sample requirements
4.1
on the axis of the film should be abandoned to the outer layer 1m, sample size >= 50mm × 100mm.
4.2
The measurement surface of the sample without oil, dust and other pollution.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33399-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33399-2016
$85.00