GB/T 33376-2016Terms and definitions for optical functional films (English PDF)
光学功能薄膜术语及其定义
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33376-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2016
Implementation date
April 1, 2017
Scope
GB/T 33376-2016 is the English-translated version of 光学功能薄膜术语及其定义.
GB/T 33376-2016 fixes the terms used in the optical functional film industry together with their definitions. Clause 1 applies the standard to optical functional films.
Clause 2 carries the vocabulary itself, arranged by subject, and opens with a group of terms on materials and parts.
Among the entries in that group are the white standard board used to calibrate instruments, which is split into a working standard board and a reference board; the protective film, treated as a broad category covering both the protection of finished goods and temporary protection during manufacture; the backlight module, described as one of the key components of an LCD panel, supplying a light source of sufficient brightness and even distribution so that an image can be displayed; and film itself, defined as a thin flat product whose thickness is small compared with its length and width and which is usually supplied in roll form.
The same group defines an adhesive as a substance glued or prepared to be glued to another object, a laminate as a product in which two or more layers of material are bonded together, a catalyst as a substance that accelerates the rate of a chemical reaction while in theory keeping its own chemical composition afterwards, and the die lip as the part of a film extrusion die through which the fluid material, once distributed evenly across the die width, is extruded and formed.
It was proposed by the China Petroleum and Chemical Industry Association and falls under the National Technical Committee on Optical Functional Film Materials (SAC/TC 431). It was issued on 30 December 2016 and has applied since 1 April 2017.
Found what you need?
Document preview — GB/T 33376-2016
National Standard of the People's Republic of China
- ICS
- 71.080.99
- Classification
- G 15
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Terms and definitions
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terms used in the optical functional film industry and its definition.
This standard applies to optical functional films.
2 Terms and definitions
2.1 Material parts
2.1.1 Whiteboard
Used to calibrate the instrument, divided into working standard whiteboard and reference whiteboard.
2.1.2 Protective film
A broad concept, all kinds of protective film products not only cited in the finished product protection, in the finished product manufacturing process, can also be used Waste, temporary protection of the media.
2.1.3 Backlight module
One of the key components of the LCD panel, the supply of sufficient brightness and uniform distribution of the light source, so that it can display the image.
2.1.4 Sticky
An adhesive that is glued to or prepared to adhere to another object.
2.1.5 Film
With the length and width compared to the thickness of a small, free to limit the maximum thickness of the thin and flat products, usually in volume form.
2.1.6 Residual adhesive spline
After the test strip is adjusted by the state, the test pressure-sensitive adhesive tape is completely separated from the release film and is not supported by special treatment The body is applied to the 180 ° peel test.
2.1.7 Laminate (noun)
A product in which two or more layers of material, or a plurality of materials, are bonded together.
2.1.8 Catalyst
Can accelerate the rate of chemical reaction, and the reaction after the end of the theory to maintain the chemical composition of less material.
2.1.9 Lip
Thin film extrusion die in the important part of the fluid material along the width of the die width evenly distributed by the mold lip extrusion molding.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33376-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33376-2016
$480.00