GB/T 33347-2016Reciprocating internal combustion gas generating set—Classification and constituent analysis of gas fuels (English PDF)
往复式内燃燃气发电机组 气体燃料分类及组分分析方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33347-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 13, 2016
Implementation date
July 1, 2017
Scope
GB/T 33347-2016 is the English-translated version of 往复式内燃燃气发电机组 气体燃料分类及组分分析方法.
GB/T 33347-2016 is the Chinese standard "Reciprocating internal combustion gas generating set—Classification and constituent analysis of gas fuels".
Its scope clause reads: This standard specifies the terms and definitions of gas fuels for reciprocating internal combustion gas generators, baseline conditions, classification, quality requirements, components Analytical methods and calculation of fuel properties.
This standard is applicable to the analysis of gaseous fuels for reciprocating internal combustion gas generating units. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 33347-2016
National Standard of the People's Republic of China
- ICS
- 29.160.40
- Classification
- K 59
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 Benchmark condition
- 5 Classification of gaseous fuels
- 6 Quality requirements for gaseous fuels
- 8.1 Component
- 8.2 air-fuel ratio
- 8.3 Low calorific value
- 8.4 Flue gas volume
- 8.5 Density
- Appendix A (informative) Typical components and low calorific value of gaseous fuels
- Appendix B (informative) Typical gas in the gas Typical conditions in the standard state
1 Scope
This standard specifies the terms and definitions of gas fuels for reciprocating internal combustion gas generators, baseline conditions, classification, quality requirements, components
Analytical methods and calculation of fuel properties.
This standard is applicable to the analysis of gaseous fuels for reciprocating internal combustion gas generating units.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Reciprocating internal combustion engine vocabulary - Part 1. Engine design and operation terminology GB/T 1883.1
Determination of hydrogen sulfide content in natural gas - Iodometric method GB/T GB/T 11060.4 Determination of sulfur compounds in natural gas - Part 4. Determination of total sulfur content by oxidation microcoulometric method
Method for determination of composition and impurity content of artificial gas
Composition analysis of natural gas - Gas chromatographic method GB/T NY/T 1700 Determination of methane and carbon dioxide in biogas - Gas chromatographic method
3 terms and definitions
GB/T 1883.1 Definitions and the following terms and definitions apply to this document.
3.1 Gas fuel
Can be used as combustible gas for internal combustion engine fuel.
3.2 Natural gas
A gaseous fossil fuel consisting mainly of methane.
3.3 Biogas
Organic matter through the microbial anaerobic digestion and decomposition of a kind of methane as the main combustible components of combustible gas.
3.4
Gas coalminemethane;
Coal mine (mine) refers to the gas, is generated and generated in the coal in the methane-based mixed gas.
3.5 Refining and finishing
Crude oil refining process generated by the composition of hydrocarbons and hydrogen-based combustible mixture.
3.6 Coke oven gas
Coking coal in the coke oven after high temperature dry distillation, in the production of coke and tar products at the same time get the combustible gas.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 33347-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 33347-2016
$145.00