GB/T 33308-2016Determination of free methanol in cosmetics - Gas chromatography (English PDF)
化妆品中游离甲醇的测定 气相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33308-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 13, 2016
Implementation date
July 1, 2017
Scope
GB/T 33308-2016 is the English-translated version of 化妆品中游离甲醇的测定 气相色谱法.
GB/T 33308-2016 is the Chinese standard "Determination of free methanol in cosmetics - Gas chromatography". Its scope clause reads: This standard specifies the method for the determination of free methanol in cosmetics by gas chromatography.
This standard applies to the cream, water, shampoo, hair gel cosmetics in the determination of free methanol. The detection limit of methanol for this standard is 6.0mg/kg, the limit of quantification is 20.0mg/kg.
Its clauses include normative reference documents; principle; reagents and materials; instruments and equipment.
Found what you need?
Document preview — GB/T 33308-2016
National Standard of the People's Republic of China
- ICS
- 71.100.70
- Classification
- Y 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 principle
- 4 reagents and materials
- 5 instruments and equipment
1 Scope
This standard specifies the method for the determination of free methanol in cosmetics by gas chromatography.
This standard applies to the cream, water, shampoo, hair gel cosmetics in the determination of free methanol.
The detection limit of methanol for this standard is 6.0mg/kg, the limit of quantification is 20.0mg/kg.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 6682 Analytical laboratory water specifications and test methods
3 principle
After pretreatment (direct dilution or water bath distillation), the samples were determined by gas chromatography, quantified by external standard method, gas chromatography-mass spectrometry confirm.
4 reagents and materials
Unless otherwise stated, the reagents used are analytical grade and water is the experimental water specified in GB/T 6682.
4.1 Ethanol
Chromatographic pure, confirmed before use without methanol.
4.2
Sodium chloride.
4.3 ethanol [phi (C2H5OH) = 75%]
ethanol (4.1) 75mL, diluted with water to 100mL.
4.4
methanol standards.
4.5 methanol standard stock solution
take appropriate amount of methanol standard (4.4) (accurate to 0.0001g), with 75% ethanol (4.3) prepared with methanol
10g/L of the standard stock solution. Is now available.
4.6 Methanol Standard Working Solution
The methanol standard stock solution (4.5) was formulated with 75% ethanol (4.3) at a concentration of 0.002 g/L, 0.005 g/L,
0.01 g/L, 0.02 g/L, 0.05 g/L, 0.10 g/L, 0.20 g/L methanol standard working solution. Is now available.
4.7 Defoamer
emulsified silicone oil.
5 instruments and equipment
5.1 Gas Chromatography (GC) instrument
with a hydrogen flame ionization detector (FID).
5.2 Gas Chromatography-Mass Spectrometry (GC-MS) instrument
equipped with electron impact ion source (EI).
5.3 Analysis of the balance
the sense of 0.0001g and 0.001g.
5.4
full-mouth water bath distillation device.
5.5 constant temperature water bath
temperature range 25 °C ~ 100 °C, temperature control accuracy ± 0.5 °C.
5.6 syringe
5 µL, 10 µL, 1 mL.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33308-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33308-2016
$145.00