Valid

GB/T 33292-2016Metal hydride hydrogen storage system for fuel cells backup power (English PDF)

燃料电池备用电源用金属氢化物储氢系统

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33292-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 13, 2016

Implementation date

July 1, 2017

Scope

GB/T 33292-2016 is the English-translated version of 燃料电池备用电源用金属氢化物储氢系统.

GB/T 33292-2016 is the Chinese standard "Metal hydride hydrogen storage system for fuel cells backup power". Its scope clause reads: This standard specifies the term and definition, designation, technical requirements, test and inspection of metal hydride hydrogen storage systems for fuel cell backup power supplies.

Measuring, marking and packaging. This standard applies to industrial, commercial fixed fuel cell backup power supply with metal hydride hydrogen storage system.

This standard applies to the working pressure does not exceed 4MPa, the working environment temperature of not less than -40 °C and not higher than 45 °C fuel cell equipment Metal hydride hydrogen storage system for power supply. Its clauses include normative reference documents; terms and definitions.

Found what you need?

Document preview — GB/T 33292-2016

National Standard of the People's Republic of China

ICS: 27.180
Classification: F 19

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 normative reference document
3 Terms and definitions
4 named
5.1 Hydrogen storage system for metal hydride
5.2 Single device
5.3 Piping and accessories
5.4 Safety measures
6 Test and Detection
6.1 General requirements
6.2 Test environmental conditions
6.3 Dehydrogenation performance test
6.4 Hydrogenation performance test
6.5 cycle charge/discharge life test
6.6 Salt spray test
6.7 Air tightness test
6.8 Vibration test
6.9 Thermal cycling test
6.10 Detection
7 logo
7.1 General requirements
7.2 Logo Contents
7.3 Box illustration
8 product random file
8.1 Transportation and installation requirements
8.2 Product quality documents
8.3 User's Manual
8.4 Installation and Maintenance Manual
9 Packaging

1 Scope

This standard specifies the term and definition, designation, technical requirements, test and inspection of metal hydride hydrogen storage systems for fuel cell backup power supplies.

Measuring, marking and packaging.

This standard applies to industrial, commercial fixed fuel cell backup power supply with metal hydride hydrogen storage system.

This standard applies to the working pressure does not exceed 4MPa, the working environment temperature of not less than -40 °C and not higher than 45 °C fuel cell equipment

Metal hydride hydrogen storage system for power supply.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 191 packaging and storage icon

GB/T 2423.10 Environmental testing for electric and electronic products - Part 2. Test methods - Test Fc. Vibration (sinusoidal)

GB/T 2423.17 Environmental testing for electric and electronic products - Part 2. Test methods Test Ka. Salt mist

GB/T 2423.23 Environmental testing for electric and electronic products - Part 2. Test methods - Test Q. Seals

GB/T 3634.1 Hydrogen - Part 1. Industrial hydrogen

GB/T 3634.2 Hydrogen - Part 2. Hydrogen, high - purity hydrogen and ultrapure hydrogen

GB/T 3873 General specification for packaging of communication equipment products

Safety specification for hydrogen use

GB/T 13306 signs

GB/T 13310 electric vibration table

GB 15382 General technical requirements for cylinder valves

Hydrogen, Hydrogen and Hydrogen Systems - Terminology GB/T GB/T 29729 Basic requirements for hydrogen system safety

GB 50177 Hydrogen station design specification

TSG21 fixed pressure vessel safety technical supervision procedures

ISO 16111 Mobile Hydrogen Storage Device Metal Hydride Reversible Absorption Hydrogen (Transportablegasstoragedevices-

Hydrogenabsorbedinreversiblemetalhydride)

3 terms and definitions

GB/T 24499 Definitions and the following terms and definitions apply to this document.

3.1 Metal hydride

Metal or alloy and hydrogen combined with the formation of reversible absorption and release of hydrogen solid materials.

3.2 Maximum temperature rise pressure maximumdevelopedpressure; MDP

Metal hydride hydrogen storage system after hydrogen saturation, at the highest temperature to reach equilibrium when the maximum gas pressure (gauge pressure).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 19962-2026|GB/T 47032-2026|GB/T 47555-2026|GB/T 47557-2026|GB/T 47558-2026|GB/T 47559-2026

How to Download GB/T 33292-2016

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.