Valid

GB/T 33277-2016Tissue paper - Determination of lead and arsenic released (English PDF)

生活用纸 可迁移性铅、砷含量的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33277-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 13, 2016

Implementation date

July 1, 2017

Scope

GB/T 33277-2016 is the English-translated version of 生活用纸 可迁移性铅、砷含量的测定.

GB/T 33277-2016 is the Chinese standard "Tissue paper - Determination of lead and arsenic released". Its scope clause reads: This standard specifies the determination of migratable lead and arsenic content in tissue.

This standard applies to the use of tissue (tissue paper, toilet paper, paper towels, kitchen paper towels, etc.) in the determination of migratory lead and arsenic content.

Its clauses include normative reference documents; principle; experimental reagents.

Found what you need?

Document preview — GB/T 33277-2016

National Standard of the People's Republic of China

ICS
85.060
Classification
Y 30

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 normative reference documents
  • 3 principle
  • 4 Experimental reagents

1 Scope

This standard specifies the determination of migratable lead and arsenic content in tissue.

This standard applies to the use of tissue (tissue paper, toilet paper, paper towels, kitchen paper towels, etc.) in the determination of migratory lead and arsenic content.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 450 paper and cardboard samples taken and the sample longitudinal and horizontal, positive and negative determination

GB/T 462 Paper, board and pulp analysis - Determination of moisture content

GB/T 6682 Analytical laboratory water specifications and test methods

3 principle

The sample was washed with acetic acid solution for a predetermined time and temperature and then treated as a sample. The contents of lead in the soaking solution were measured by atomic absorption spectrophotometer

The content of arsenic in soaking solution was measured by atomic fluorescence spectrometer.

4 Experimental reagents

4.1 Pretreatment reagent

4.1.1 Water

GB/T 6682, two or more.

4.1.2 acetic acid solution (4%)

take 40mL acetic acid (analytical grade), add water diluted to 1000mL.

4.2 Reliable reagents for the determination of lead content

4.2.1

concentrated nitric acid, rho = 1.40g/mL, mass fraction of 65% to 68%.

4.2.2 nitric acid (1 1)

take 50mL concentrated nitric acid (4.2.1) slowly add 50mL of water.

4.2.3 nitric acid (6 94)

take 3mL concentrated nitric acid (4.2.1) slowly add 50mL of water, diluted to 100mL.

4.2.4 ammonium dihydrogen phosphate solution (20g/L)

Weigh 2.0g ammonium dihydrogen phosphate, diluted with water to 100mL.

4.2.5 lead standard solution

self-preparation or to have the appropriate qualifications of the institutions to buy. Self-preparation can be done in two ways.

a) lead standard stock solution. accurately weighed 1.000g metal lead (99.99%) graded plus a small amount of nitric acid (1 1) (4.2.2) dissolved by heating,

The total does not exceed 37mL, into the 1000mL volumetric flask, add water to the mark. The solution contained 1.0 mg of lead per milliliter.

b) lead standard stock solution. accurately weighed 0.1598g lead nitrate (excellent grade pure) in the beaker, add a small amount of water, then add 20mL thick

Nitric acid (4.2.1) dissolved, into the 100mL volumetric flask, diluted with water to the mark, the solution per milliliter equivalent to 1.0mg lead.

4.2.6 Lead Standard working solution

concentration of 100ng/mL, diluted with nitric acid (6 94) (4.2.3).

4.3 Reagents for the determination of migratory arsenic content

4.3.1

hydrochloric acid, rho = 1.18g/mL, the mass fraction of 36% to 38%.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 33277-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33277-2016

$85.00