GB/T 33198-2016General specification for sit-style motorboats (English PDF)
坐式摩托艇通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33198-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 13, 2016
Implementation date
July 1, 2017
Scope
GB/T 33198-2016 is the English-translated version of 坐式摩托艇通用技术条件.
GB/T 33198-2016 is the Chinese standard "General specification for sit-style motorboats".
Its scope clause reads: This standard specifies the product classification and identification code, design, requirements, inspection rules, and standards for the type of motorboat (hereinafter referred to as "motorboat") Chi, packaging, transportation and storage.
This standard applies to the hull length of not more than 4m, the use of gasoline engine power jet propulsion pump driven a variety of sitting motor boats Manufacture and acceptance.
Its clauses include normative reference documents; terms and definitions; product classification and identification code.
Found what you need?
Document preview — GB/T 33198-2016
National Standard of the People's Republic of China
- ICS
- 47.080
- Classification
- U 18
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 4 product classification and identification code
1 Scope
This standard specifies the product classification and identification code, design, requirements, inspection rules, and standards for the type of motorboat (hereinafter referred to as "motorboat")
Chi, packaging, transportation and storage.
This standard applies to the hull length of not more than 4m, the use of gasoline engine power jet propulsion pump driven a variety of sitting motor boats
Manufacture and acceptance.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 191 packaging and storage icon
GB 14023-2011 Limits and measurements of vehicles, ships and radio disturbances used by internal combustion engines for the protection of external receivers method
GB/T 14652.1 Boat Refractory Fuel Hose
Code for identification of small hull bodies GB/T 16696-2008
Boiler electrical system - Ultra - low voltage direct current device GB/T 19311-2003
GB/T 19916 small boat main data
Submarine master manual GB/T 19917-2005
GB/T 30498 Boat for permanent installation of petrol and diesel fuel tanks
Technical Requirements for Axial Flow Pumps for Mixed Water Pumps
3 terms and definitions
GB/T 19916 Definitions and the following terms and definitions apply to this document.
3.1 Sitting-style motorboat
To drive in a cross-riding manner, the direction of the manipulation, the use of waterjet way to promote the boat.
3.2 Full load condition
The motorboat is filled in the tank, fully equipped and in the state of the rated crew.
4 product classification and identification code
4.1 Product classification
The motorboat is divided according to the number of occupants.
a) single motorboat;
b) Double motorboat;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33198-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 33198-2016
$145.00