GB/T 33054-2016Determination of content of sodium sulfide in sulphur dye products (English PDF)
硫化染料产品中硫化钠含量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33054-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 13, 2016
Implementation date
May 1, 2017
Scope
GB/T 33054-2016 is the English-translated version of 硫化染料产品中硫化钠含量的测定.
GB/T 33054-2016 is the Chinese standard "Determination of content of sodium sulfide in sulphur dye products". Its scope clause reads: This standard specifies the determination of sodium sulfide content in sulfur dyes.
This standard is applicable to the determination of sodium sulfide in sulfide dyes. Its clauses include normative reference documents; principle; reagents and solutions; instruments and equipment.
Found what you need?
Document preview — GB/T 33054-2016
National Standard of the People's Republic of China
- ICS
- 71.100.01
- Classification
- G 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 principle
- 4 reagents and solutions
- 5 instruments and equipment
1 Scope
This standard specifies the determination of sodium sulfide content in sulfur dyes.
This standard is applicable to the determination of sodium sulfide in sulfide dyes.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Preparation of standard titration solution for GB/T 601 chemical reagents
Preparation of preparations and preparations for use in the test methods for chemical reagents GB/T 603
GB/T 6682 Analytical laboratory water specifications and test methods
Representation and Judgment of Numerical Correction Rule and Limit Value in GB/T 8170-2008
General rules for potentiometric titration of chemical reagents GB/T 9725-2007
3 principle
Ferrous sulfate and sodium sulfide react to form ferrous sulfide precipitates with potentials at the end of the reaction. Using potentiometric titration, with sulfuric acid
Iron standard titration solution titration of the vulcanized dye measurement solution, according to the consumption of ferrous sulfate standard titration solution volume calculated sulfur dyes
Sodium sulfide content. The reaction equation is.
Na2S FeSO4 = FeS -> Na2SO4
4 reagents and solutions
Unless otherwise specified, only the reagents identified as analytical reagents and the tertiary water specified in GB/T 6682 are used. Standard titration used in the test
Solution, indicator, in the absence of other requirements, according to GB/T 601 and GB/T 603 provisions of the preparation and calibration.
Ferrous sulfate standard titration solution. c (FeSO4) = 0.1mol/L, preparation and calibration see Appendix A.
5 instruments and equipment
The equipment and equipment shall meet the following requirements.
a) analysis of the balance, the volume is not greater than 0.0001g;
b) acidity meter, the accuracy of ± 0.02pH units;
c) potentiometer with an accuracy of ± 2mV;
d) glass composite electrode;
e) magnetic stirrer;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33054-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33054-2016
$85.00