GB/T 32990-2016Smart perfusion machine for cast-in-situ foam concrete composite wall (English PDF)
现浇泡沫混凝土复合墙体智能灌注机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32990-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 13, 2016
Implementation date
September 1, 2017
Scope
GB/T 32990-2016 is the English-translated version of 现浇泡沫混凝土复合墙体智能灌注机.
GB/T 32990-2016 is the Chinese standard "Smart perfusion machine for cast-in-situ foam concrete composite wall".
Its scope clause reads: This standard specifies the terms and definitions of the cast-in-place foam composite wall intelligent infusion machine (hereinafter referred to as perfusion machine), type, type and Basic parameters, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to cast-in-place foam concrete composite wall (products) intelligent perfusion machine. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 32990-2016
National Standard of the People's Republic of China
- ICS
- 91.110
- Classification
- Q 92
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the terms and definitions of the cast-in-place foam composite wall intelligent infusion machine (hereinafter referred to as perfusion machine), type, type and
Basic parameters, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard applies to cast-in-place foam concrete composite wall (products) intelligent perfusion machine.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 191 packaging and storage icon
High quality carbon structural steel GB/T 699-1999
Shapes and position tolerances Not included Tolerance values GB/T 1184-1996
GB/T 1220-2007 stainless steel rods
GB/T 1804-2000 General tolerances Tolerances of linear and angular dimensions without tolerances
GB 2894 Safety signs and guidelines for their use
Stainless steel cold - rolled steel sheets and stripes GB/T Mechanical electrical machinery - Electrical equipment - Part 1. General technical requirements GB 5226.1
GB/T 5574 Industrial rubber sheet
GB/T 6388 shipping package collection and delivery mark
Gray cast iron pieces GB/T Casting carbon steel for general engineering purposes GB/T 11352-2009
GB/T 13306 signs
General specification for packaging of electromechanical products GB/T 13384
Mechanical safety emergency stop design principles GB 16754-2008
GB/T 17248.3 Noise emitted by acoustic machines and equipment Operating position and other specified positions Measurement of emission sound pressure level
On-site simple method
JC/T 402 Technical requirements for rust protection of cement machinery
General technical requirements for welding parts of building materials machinery
JG/T 266 foam concrete
QB/T 3625 Teflon sheet
3 terms and definitions
The following terms and definitions apply to this document.
3.1
Pouring foam concrete composite wall intelligent perfusion machine smartperfusionmachineforcast-in-situfoamconcretecom- positewal
According to the intelligent control program for feeding, stirring, conveying, perfusion of foam concrete composite wall field operation equipment.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32990-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32990-2016
$145.00